GPS Module NEO-6M compatible

This inexpensive and powerful GPS module is perfect for beginners experimenting with GPS on Arduino. With the included ceramic antenna, you will always have sufficient GPS reception. The board has four mounting holes for optimal installation. Communication with the GPS module is via the serial interface. Please note: The logic voltage from the serial interface must not exceed 3.6V. If you operate the module with an ESP32 or ESP8266, you can connect it directly. If you operate the module with an Arduino, you need to use a level converter / logic level converter. The module operates with baud rates from 9600bps to 115200 bps and outputs standard NMEA messages. Pin headers are not included in the delivery.

You can find a suitable library on Github under the following link:
https://github.com/cristiansteib/GPS-neo-6m

Technical Details:

• GPS Chip: NEO-6M-0-001 compatible
  
• Supply voltage: 3 to 5V DC  
  
• Logic level: 2.7 - 3.6V DC
  
• Communication: Serial interface (UART)
  
• Default baud rate: 9600bps
  
• Ceramic antenna with U.FL connector
  
• EBROM with backup battery
  
• LED: Blinks as soon as GPS signal is present
  
• Size: 36 x 24 x 3.5mm
  
• Weight: 6g
  

Delivery content:

• 1x GPS Module NEO-6M Breakout Module
  
• 1x Ceramic Antenna