10A 600W MOSFET Driver 4-60V DC
This MOSFET driver module switches larger DC loads up to 60 V from an Arduino or Raspberry Pi, such as LEDs, motors, pumps, fans or solenoid valves. The control signal passes through optocouplers, switching is done by two MOSFETs in TO-252 packages. PWM can dim LEDs or change the speed of DC motors, an «ON» LED shows the switching state.
Note: With inductive loads such as motors, pumps and solenoid valves, fit a freewheeling diode at the load. At high currents the MOSFETs and traces get warm.
Recommended Accessories:
Features:
- Control input via optocouplers, 2 optocouplers in the picture
- Two MOSFETs in TO-252 packages, Alpha & Omega logo
- Digital or PWM control up to 2.5 kHz
- Control voltage 3 V to 24 V, so suitable for 3.3 V and 5 V logic
- 3-pole and 4-pole screw terminals for control, supply and load
- «ON» LED for the switching state
- 4 mounting holes
Application Examples:
- Dimming LED strips
- Controlling the speed of DC motors, pumps and fans
- Switching solenoid valves and heating elements
Technical Data:
- Load voltage: 4 V to 60 V DC
- Continuous load current: 10 A
- Maximum load current: 15 A
- Control voltage high: 3 V to 24 V DC
- Control voltage low: 0 V to 0.6 V DC
- Control: digital I/O or PWM
- PWM frequency: 0 Hz to 2.5 kHz
- Dimensions: 46.2 × 29.4 × 15 mm
- Weight: 12 g
Scope of Delivery:
- 1× 10A 600W MOSFET Driver 4-60V DC
10A 600W MOSFET Driver 4-60V DC
- Brand: purecrea
- Product Code: 421339
- Availability: In Stock
-
CHF8.90
- Ex Tax: CHF8.23
Related Products
IRF520 MOSFET Driver Module
With this MOSFET driver module, larger loads can be switched with a 5 V signal, for example from an ..
CHF3.90 Ex Tax: CHF3.61
Assorted Transistor Set of 170 Pieces
This set contains 17 different transistors in the TO-92 package, 10 pieces of each type, 170 pieces ..
CHF12.90 Ex Tax: CHF11.93
Diode Set 100 Pieces Assorted
This set contains 100 diodes in 8 types that are often needed in Arduino and electronics projects: s..
CHF5.90 Ex Tax: CHF5.46
SSR-40DD 40A Solid State Relay DC to DC
This solid state relay switches DC loads up to 60 V and 40 A via a DC control signal of 3 to 32 V, f..
CHF15.90 Ex Tax: CHF14.71
15A 400W MOSFET Driver 5-36V DC
This MOSFET driver module switches larger loads via an Arduino or Raspberry Pi, for example DC loads..
CHF4.90 Ex Tax: CHF4.53
Gravity MOSFET Driver Module 10A
The Gravity MOSFET module from DFRobot switches DC loads from 5 V to 36 V with a logic signal of 3.3..
CHF6.90 Ex Tax: CHF6.38
Light and Motor Driver Module for Python
The DFRobot driver board switches a load of up to 10 A at 5 to 24 V via a MOSFET with PWM, for examp..
CHF10.90 Ex Tax: CHF10.08
5-30V Dual MOSFET Trigger Time Relay Module
With this MOSFET timer relay, you can set a delay from 0.1sec to 999min before the module turns on o..
CHF9.90 Ex Tax: CHF9.16
M5Stack SSR 10A Solid State Relay Unit
The UNIT-DCSSR is a DC-to-DC solid state relay controller with an ESP32C3 controller board. It offer..
CHF23.90 Ex Tax: CHF22.11
IRF540 MOSFET 4 Channel Driver Module
With the IRF540 MOSFET 4 Channel Driver Module, you can take your electronics projects to the next l..
CHF9.90 Ex Tax: CHF9.16
Tags: 10A, 600W, MOSFET, Module, Breakout, PWM, 3.3V, 5V, MOS, FET, transistor, AOD2810, Optocoupler, 60V