3.5 Inch IPS Capacitive Touchscreen with GDI Port 480x320

The 3.5 inch touch display from DFRobot shows 480 × 320 pixels on an IPS panel with a 178° viewing angle. Touch panel and display are bonded without an air gap (optical bonding): this reduces reflections and keeps dust out from between the layers. The capacitive touch detects up to 5 points. It is connected via SPI on the 14-pin header or with a single FPC cable to the GDI connector of the FireBeetle 2 boards and programmed with the DFRobot_GDL Arduino library.

Recommended Accessories:

• FireBeetle 2 ESP32-E IoT Development Board 16M Flash 2M PSRAM
• FireBeetle 2 ESP32-C5 IoT Development Board
• 16GB MicroSDHC Memory Card Class 10 UHS-I incl. SD Adapter

Features:

• IPS 480 × 320 pixels, viewing angle 178°, 300 cd/m², contrast 800:1, anti-fingerprint coating
• Optical bonding without air gap
• Capacitive touch with 5 points, connected via I2C (SCL, SDA, INT, reset), gestures such as tap, double tap, long press and swipe
• GDI connector (18-pin FPC) for FireBeetle 2 boards such as ESP32-E or ESP32-C5
• 14-pin header for SPI on other boards
• MicroSD card slot for images and UI elements
• Backlight BLK: on when not connected, HIGH full brightness, LOW off

Application Examples:

• Control panels and dashboards in the smart home
• Weather displays, clocks and info displays with Wi-Fi
• User interfaces for 3D printers and devices
• Portable game consoles and calculators

Documentation:

• Wiki DFRobot DFR1092
• Schematic (PDF)
• Datasheet (PDF)
• Graphics library DFRobot_GDL for Arduino (GitHub)

Technical Data:

• Manufacturer: DFRobot
• Manufacturer SKU: DFR1092
• Diagonal: 3.5 inch
• Resolution: 480 × 320 pixels (HVGA)
• Display: IPS, viewing angle 178°
• Display controller: ST7365P
• Brightness: 300 cd/m²
• Contrast: 800:1
• Active area: 48.96 × 73.94 mm
• Touch: capacitive, 5 points, GT911 controller
• Interfaces: SPI, GDI
• Operating voltage: 3.3 V to 5 V DC
• Current consumption: 50 to 80 mA at 5 V (DFRobot)
• Header: VCC, GND, SCLK, MOSI, MISO, SCR_CS, RST, DC, BLK, SCL, SDA, INT, SD_CS, TP_R
• Storage: MicroSD card slot
• Library: DFRobot_GDL
• Dimensions: 95.0 × 54.5 × 5.7 mm
• Mounting holes: 2.0 mm, spacing 90 × 50 mm
• Weight with packaging: 62.6 g

Scope of Delivery:

• 1× 3.5 inch IPS capacitive touchscreen with GDI port 480 × 320
• 1× FPC cable 18-pin for GDI
• 1× pin header 14-pin, 2.54 mm pitch