ESP32MiniKit Wemos

The ESP32 Wemos MiniKit is the successor to the Wemos D1 Mini ESP8266. Besides WiFi, the microcontroller also has Bluetooth and Bluetooth LE, as well as more IO pins and improved analog inputs. The ESP32 can be programmed under Arduino. However, the board must first be integrated. We recommend the ESP32 only for advanced users, as it is not yet supported by all Arduino libraries. In addition to the WiFi / BLE SoC, the ESP32 Wemos MiniKit includes a CP2104, which converts USB to serial and allows your computer to communicate with the microcontroller. Thanks to its small form factor, the ESP32 Wemos MiniKit can be directly plugged into a bredboard and jumper cables can still be plugged in on both sides. Please note: This only works if only the inner pin rows are soldered. As soon as all pin rows are soldered, the ESP32 can no longer be plugged into a breadboard.

Link CP2104 USB-UART driver:

https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers

Installation of the ESP32 in Arduino IDE:

For programming in the Arduino IDE, you can select the following board:

«MH ET Live ESP32MiniKit»

Various infos about the ESP32 MiniKit and compatible shields:

• https://riot-os.org/api/group__boards__esp32__mh-et-live-minikit.html

Pinout ESP32MiniKit Wemos:

Technical details ESP32 MiniKit:

• Dual-core Tensilica LX6 microprocessor
• Up to 240MHz clock frequency
• 520kB internal SRAM
• Integrated 802.11 BGN WiFi transceiver
• Integrated dual-mode Bluetooth (BLE and Classic)
• Operating voltage: 3.3V
• Flash: 4M bytes
• PSRAM: 4M bytes
• Support capacitive touch sensors
• USB-UART interface: CP2104
• Dimension: 40 x 31 x 4.2mm
• Weight:16g

Delivery contents:

• 1x ESP32MiniKit Wemos
• 4x Pin Header 1x10 Pin
• 4x Female Header short 1x10 Pin
• 4x Female Header long 1x10 Pin