ePLA-ST Black Filament 1.75mm 1Kg eSun

EPLA-ST has a very high toughness, impact resistance and elongation at break, making it suitable for mechanically stressed parts. The material is often used in industrial parts such as prototypes or robot grippers. The material is also excellent for model making. EPLA-ST prints very well like PLA and warps only slightly. Thus, you have almost no wrapping.

Features:

• Very resistant
• Easy to print
• Very good adhesion to the print bed
• High accuracy of less than +-0.05mm in diameter 
• Low shrinkage rate, therefore also low warping
• Optimal layer adhesion
• Good impact resistance
• High elongation at break

PLA+ recommended printing parameters:

• Printing temperature: 210-230°C Recommended: 215°C
• Heated bed temperature: 45-60°C Recommended: 60°C
• Fan speed: 50 to 100% Recommendation: 80%
• Feed speed: 40-100mm/s (2400-6000mm/min)

Download:

• Technical datasheet
• Safety datasheet
  

Technical details:

• Color: Black
• Item number: ePLA-ST175B1
• Filament weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Printing temperature: 210-230°C
• Density: 1.25g/cm3
• Melt flow index: 3.2g/10min
• Impact strength: 63kJ/m²
• Elongation at break: 90%
• Tensile strength: 34.3MPa
• Form stability: 52°C
• Spool size diameter outside: 20cm
• Spool width: 6.7cm
• Diameter inside (hole): 5.3cm
• Filament weight: 1000g
• Empty spool weight: 278g
• Total weight: 1460g
• Dimensions: 205 x 215 x75mm

Package includes:

• 1x ePLA-ST Black Filament 1.75mm 1Kg eSun