ABS+ Black Filament 1.75mm 1Kg eSun

ABS Plus by eSun is an improved ABS filament that prints much better and has very low warp. ABS+ is for advanced users, is easier to print compared to standard ABS and also gives you good adhesion properties and almost no warp effect when printing! ABS+ is the alternative to ABS. ABS+ has very good toughness and impact resistance to withstand drops, impacts, and breaks caused by elongation. The printed surface of ABS+ cannot be smoothed afterwards with solvent. ABS+ can be better mechanically processed with, for example, sandpaper.

Features:

• Very resistant
• Reliable bed adhesion
• Lower shrinkage rate therefore also low warping
• Optimal layer adhesion
• Good impact resistance
• Resistant to many oils

Recommended print parameters for ABS+:

• Print temperature: 220-260°C Recommended: 240°C
• Heated bed temperature: 100°C
• Fan speed: 0 to 20% Recommendation: 15% or off
• Feed rate: 40-60mm/s (2400-3600mm/min)

Download:

• eSun Product Manual
• Filament Data Sheet

Technical Details:

• Color: Black
• Item number: ABS+175B1
• Weight Filament: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Print temperature: 220-260°C
• Density: 1.06g/cm3
• Melt flow index: 15g/10min
• Impact resistance: 42kJ/m²
• Breaking elongation: 30%
• Tensile strength: 40MPa
• Form stability: Approx. 90°C
• Spoiler size outside diameter: 20cm
• Reel width: 6.85cm
• Inner diameter (hole): 5.3cm
• Filament weight: 1000g
• Empty spool weight: 229g
• Total weight: 1423g
• Dimensions: 205 x 215 x75mm

Scope of delivery:

• 1x ABS+ Black Filament 1.75mm 1Kg eSun