Dragino E2 Extension Cable

The Dragino E2 is a 1 m breakout cable for the LoRaWAN sensors LHT65N and LHT65S. It plugs into the USB-C socket of the sensor and routes all contacts to 9 connections at 2.54 mm pitch. With a USB-TTL adapter, it is used to send AT commands and to update the firmware. External signals can also be connected in ADC or interrupt mode. According to Dragino, the cable also fits the LHT52.

Important: The USB-TTL adapter must work at 3.3 V. AT commands are locked by default and are unlocked with the password from the manual, the baud rate is 9600.


Recommended Accessories:


Features:

  • AT commands via UART with a USB-TTL adapter
  • Firmware update for LHT65N and LHT65S, according to Dragino also for LHT52
  • ADC mode: measure an external voltage, range about 0.1 to 1.1 V, higher voltages via a voltage divider
  • Interrupt and counting mode for external contacts
  • All contacts of the USB-C socket broken out

Application Examples:

  • Updating the firmware of an LHT65N, LHT65S or LHT52
  • Configuring the sensor with AT commands
  • Connecting an external contact or pulse generator in interrupt or counting mode
  • Measuring an analogue signal in ADC mode

Documentation:


Technical Data:

  • Manufacturer: Dragino
  • Manufacturer SKU: NE2
  • Connection: USB-C plug to 9 connections, 2.54 mm pitch
  • Wiring for firmware update according to Dragino: adapter GND to port 1, 3.3 V to port 4 (BOOT_CTL), RXD to port 5, TXD to port 9
  • Length: 1 m
  • Weight: 10 g

Scope of Delivery:

  • 1× Dragino E2 Extension Cable

Write a review

Note: HTML is not translated!
    Bad           Good

Dragino E2 Extension Cable

  • Brand: Dragino
  • Product Code: 422493
  • Availability: In Stock
  • CHF7,90

  • Ex Tax: CHF7,31

Related Products

Mini USB UART FTDI Programmer 3.3/5V USB Serial

Mini USB UART FTDI Programmer 3.3/5V USB Serial

This breakout board carries an FT232 compatible chip that provides a connection from USB to serial. ..

CHF9,90 Ex Tax: CHF9,16

LHT52 Indoor LoRaWAN Temperature and Humidity Sensor 868MHz

LHT52 Indoor LoRaWAN Temperature and Humidity Sensor 868MHz

The Dragino LHT52 measures temperature and humidity indoors and sends the values via LoRaWAN. It is ..

CHF31,90 Ex Tax: CHF29,51

LHT65N E3 LoRaWAN Temperature and Humidity Sensor

LHT65N E3 LoRaWAN Temperature and Humidity Sensor

The Dragino LHT65N E3 measures temperature and humidity with the built-in sensor and additionally th..

CHF47,90 Ex Tax: CHF44,31

External temperature probe for LHT52 and LHT65N

External temperature probe for LHT52 and LHT65N

The external AS01 temperature probe from Dragino is connected to the USB-C socket of the LHT52 and L..

CHF7,90 Ex Tax: CHF7,31

LHT65N E5 LoRaWAN Temperature and Humidity Sensor with Light Sensor

LHT65N E5 LoRaWAN Temperature and Humidity Sensor with Light Sensor

The Dragino LHT65N E5 measures temperature and humidity with the built-in sensor and additionally th..

CHF47,90 Ex Tax: CHF44,31

LHT65S E3 LoRaWAN Temperature and Humidity Sensor

LHT65S E3 LoRaWAN Temperature and Humidity Sensor

The Dragino LHT65S E3 measures temperature and humidity with the built-in sensor and additionally th..

CHF52,90 Ex Tax: CHF48,94

LHT65S NE117 LoRaWAN Temperature and Humidity Sensor

LHT65S NE117 LoRaWAN Temperature and Humidity Sensor

The Dragino LHT65S NE117 measures temperature and humidity with the built-in sensor and additionally..

CHF62,90 Ex Tax: CHF58,19

Tags: Dragino, LHT65N, LHT52, Adapter, Extension, Cable, Cable, USB-C, 2.54mm, Pin, Breakout, Update, Firmware, AT, Commands, Commands, ADC, Interrupt, NE2, LHT65S