Creality Ender-3 S1 Pro 220x220x270 3D Printer
The Ender-3 S1 Pro is the improved version of the innovative Ender-3 S1 from Creality. Compared to the Ender-3 S1, the Pro has received some upgrades. The new Sprite double gear direct extruder is now equipped with a completely metal housing. This has increased the print temperature from 260°C to 300°C. Furthermore, the heated bed temperature has also been increased from up to 100°C to 110°C. The 4.3 inch screen with button control has been replaced by a capacitive LCD touchscreen of the same size. Instead of the PC spring steel bed from the Ender 3 S1, the Pro now has a high-quality PEI bed for optimal adhesion and printing properties. While the Ender-3 S1 only comes with an interface for LED lighting, the Pro comes with an LED light bar already mounted on the upper frame. The Ender-3 S1 Pro is the ultimate printer for beginners and advanced users who want a precise 3D printer that delivers optimal results in a very short time after unpacking. The automatic CR-Touch leveling system guarantees a perfect first layer without tedious manual alignment. The printer is 96% pre-assembled and can be fully assembled in 6 simple steps.
Recommended Accessories:
- Filament
- Isopropyl Alcohol for cleaning the print bed
- 3DLac Adhesive Spray
- Brass wire brush for hot end / nozzle cleaning
- 0.4mm MK8 Micro Swiss nozzle coated
- eClean cleaning filament
- Filament vacuum sealing set Pro 2 eVacuum by eSun
- PB 515 screwdriver set
- 235x235mm PEI Magnetic spring steel building board for Ender-3 S1
Recommended Upgrades Ender 3 S1 Pro:
- Creality Sonic Pad
- eBox Filament Drying Dry Box
- Silicone Damping Spring Set for Heating Bed
- 0.4mm MK8 Micro Swiss A2 Steel Nozzle Coated
Comparison difference Ender 3 S1 VS. Ender 3 S1 Pro
| Ender 3 S1 | Ender 3 S1 Pro | |
| All Metal Hotend | No | Yes |
| Max Nozzle Temperature | 260°C | 300°C |
| Max Heated Bed Temperature | 100°C | 110°C |
| Display | 4.3 Inch Screen Controlled By Button | 4.3 Inch Touchscreen |
| UI Languages | Chinese and English | German, English, Chinese, Spanish, French, Italian, Portuguese, Russian, Turkish |
Features:
- 220x220x270 Print Volume
- 96% pre-assembled, built in just 6 steps
- Automatic bed leveling with CRTouch
- Double driven Z axis
- 32-bit silent mainboard with USB-C
- New "Sprite" double gear direct extruder now with full metal hot end
- Printing temperature up to 300°C
- PEI spring steel print bed
- Filament sensor
- 4.3 Inch LCD touch display
- Resume print function
- LED light bar
Documentation:
Printable Filaments:
Recommended Slicer Software :
- PrusaSlicer (Free and recommended): https://www.prusa3d.com/prusaslicer/
- Simplify3d (Paid but Best): https://www.simplify3d.com
- Cura (Free): https://ultimaker.com/de/software/ultimaker-cura
Technical Details:
- Manufacturer: Creality
- Manufacturer SKU: 1001020398
- Input voltage: 230V AC
- Printing technology: FFF/FDM/LPD
- Bed leveling: CR Touch Automatic Bed Leveling
- Print volume: 220x220x270mm
- Print tolerance: ±0.1mm
- Max Print Speed: 150mm/s
- Layer thickness: 0.05mm-0.35mm
- Nozzle: 0.4mm
- Extrusion force: 80N
- Hotend temperature: max. 300°C
- Print bed temperature: max. 110°C
- Print bed material: PEI
- Power: 350W
- Filament diameter: 1.75mm
- Extruder type: Direct Extruder Full Metal
- Supported formats: STL, OBJ
- Control: LCD touchscreen, USB-C, SD card
- Dimension: 490 x 455 x 625mm
- Weight: 12Kg
Package includes:
- 1x Creality Ender-3 S1 Pro 220x220x270 3D Printer
- 1x Toolset for assembly
- 1x Side cutter
- 1x spatula
- 1x filament sample for test print
- 1x Micro-SD card with USB adapter
- 1x Needle for nozzle cleaning
Creality Ender-3 S1 Pro 220x220x270 3D Printer
- Brand: Creality 3D
- Product Code: 422299
- Availability: In Stock
-
CHF319,00
- Ex Tax: CHF295,10
Related Products
PLA+ Filament 1.75mm Black 1Kg eSun
PLA Plus black PLA+175B1 from eSun is based on a standard PLA filament. The following properties hav..
CHF19,90 Ex Tax: CHF18,41
235x235mm PEI Magnetic Spring Steel Build Plate for Ender 3 Pro / CR-20 Pro
This PEI Magnetic Spring Steel Print Plate from Creality fits the Ender 3 V2, Ender, Ender 3, Ender ..
CHF39,90 Ex Tax: CHF36,91
0.4mm MK8 Micro Swiss Nozzle coated
This MK8 nozzle from Micro Swiss is made of brass and is additionally coated with TwinClad XT. TwinC..
CHF14,90 Ex Tax: CHF13,78
0.2mm MK8 Micro Swiss Nozzle coated
This MK8 Nozzle from Micro Swiss is made of brass and has been additionally coated with TwinClad XT...
CHF14,90 Ex Tax: CHF13,78
0.6mm MK8 Micro Swiss Nozzle Coated
This MK8 Nozzle by Micro Swiss is made of brass and is additionally coated with TwinClad XT. TwinCla..
CHF14,90 Ex Tax: CHF13,78
0.8mm MK8 Micro Swiss Nozzle coated
This MK8 Nozzle from Micro Swiss is made of brass and coated with TwinClad XT. TwinClad XT is a very..
CHF14,90 Ex Tax: CHF13,78
Set of 5 pieces. MK8 Micro Swiss Nozzle coated 0.2mm-0.8mm
With this nozzle set, you have all the common nozzles for experimenting with different nozzle diamet..
CHF54,90 Ex Tax: CHF50,79
Creality Nozzle Set MK Hardened Steel 8 Pieces
This nozzle set includes 8 nozzles from 0.25mm to 0.8mm. These original Creality nozzles are suitabl..
CHF49,90 Ex Tax: CHF46,16
0.4mm MK8 Micro Swiss A2 Steel Nozzle Coated
This MK8 nozzle from Micro Swiss is made of A2 steel (1.2363) and additionally coated with TwinClad ..
CHF18,90 Ex Tax: CHF17,48
0.6mm MK8 Micro Swiss A2 Steel Nozzle Coated
This MK8 nozzle from Micro Swiss is made of A2 steel (1.2363) and has been further coated with TwinC..
CHF18,90 Ex Tax: CHF17,48
0.4mm MK8 Micro Swiss M2 Hardened Steel Nozzle Coated
This MK8 nozzle by Micro Swiss is made of M2 (1.3343) steel and has been electroless nickel and WS2 ..
CHF22,90 Ex Tax: CHF21,18
Creality HALOT-LITE CL-89L 4K Monochrome UV-LCD 3D Printer
The HALOT-LITE is an 8.9” resin printer from Creality. The printer is Creality's latest flagship and..
CHF249,00 Ex Tax: CHF230,34
CR Touch Auto Leveling Kit wide compatibility
CR Touch is an automatic leveling sensor from Creality for 3D printers. With the sensor, the print b..
CHF46,90 Ex Tax: CHF43,39
Creality Sprite Extruder Pro
This is the all-metal hotend version of the Sprite extruder. The Sprite Pro is a high-precision dire..
CHF89,90 Ex Tax: CHF83,16
Artillery Genius Pro 220x220x250mm 3D Printer
The Genius Pro is the successor to the popular and recognized Artillery Genius 3D printer. The Geniu..
CHF199,00 Ex Tax: CHF184,09
235x235 PEI Double-Sided Magnetic Spring Steel Build Plate
This is a double-sided magnetic print bed / print plate from Creality. One side of the spring steel ..
CHF44,90 Ex Tax: CHF41,54
Creality CR-10 Smart Pro 300x300x400 3D Printer
The new CR-10 Smart Pro is the revised version of the CR-10 Smart from Creality. Unlike the CR-10 Sm..
CHF449,00 CHF549,00 Ex Tax: CHF415,36
Creality CV-Laser Module Kit 24V 1.6W
This is a 1.6W semiconductor laser for the Ender-3 S1 and Ender-3 S1 Pro. With the CV-Module laser y..
CHF69,90 Ex Tax: CHF64,66
Titan Heatbreak M6 D6 L19
This is an original Creality replacement part for the "Throat Tube" in the new Sprite Extruder. The ..
CHF11,90 Ex Tax: CHF11,01
235x235mm Frosted Cold Printing Magnetic Spring Steel Build Plate
With this printing plate from Creality, you can print PLA filaments without any heating and thus sav..
CHF26,90 Ex Tax: CHF24,88
Creality Sprite Extruder Pro Kit with Rollers and Cable
This is the upgrade kit from Sprite All-Metal Hotend for your Ender 3 3D printer. The kit includes e..
CHF105,00 Ex Tax: CHF97,13
Creality Sprite Extruder Silicone Protective Cover
This original Creality replacement part serves as a replacement for the heat-insulating sheath (sock..
CHF3,90 Ex Tax: CHF3,61
Creality Heating Block Kit Sprite Extruder Pro
This heating block kit is a replacement part for the Sprite Extruder of the Ender 3 S1, Pro and Sr10..
CHF27,90 Ex Tax: CHF25,81
Creality Netac 8GB SD Card
This 8GB Netac SD card from Creality is suitable for all 3D printers with an SD card slot. If a 3D p..
CHF11,90 Ex Tax: CHF11,01
3010 Blower Fan Sprite Extruder
This original Creality replacement part serves as a replacement for the hotend fan in the Sprite ext..
CHF9,90 Ex Tax: CHF9,16
4010 Blower Fan Sprite Extruder
This original Creality spare part serves as a replacement for the filament fan in the Sprite Extrude..
CHF10,90 Ex Tax: CHF10,08
Creality Spring for Heating Bed and Extruder
This is an original Creality spring that you can use in the extruders or the print bed.Technical Det..
CHF1,90 Ex Tax: CHF1,76
Titanium-Copper Heatbreak M6 D6 L19
This is an original Creality replacement part for the "Throat Tube" in the new Sprite extruder. The ..
CHF15,90 Ex Tax: CHF14,71
Ender-3 S1 X-axis belt length 825mm
This GT2 belt serves as a replacement for the X-axis belt of the Ender-3 S1 and Ender-3 S1 Pro. The ..
CHF6,90 Ex Tax: CHF6,38
32-Bit Creality Silent Mainboard V2.4.S1 with Ender-3 S1 Pro Firmware
The firmware for Ender-3 S1 Pro is already installed on this 32-bit Silent V2.4.S1 motherboard. If y..
CHF69,90 Ex Tax: CHF64,66
0.3mm MK8 Micro Swiss Nozzle Coated
This MK8 Nozzle Nozzle from Micro Swiss is made of brass and is additionally coated with TwinClad XT..
CHF14,90 Ex Tax: CHF13,78
Creality CV-Laser Module Kit 24V 5W
This is a 5W semiconductor laser for the Ender-3 S1 and Ender-3 S1 Pro. With the CV module laser, yo..
CHF114,90 Ex Tax: CHF106,29
Creality Sonic Pad
The Sonic Pad from Creality is a 64-bit tablet with a 7-inch touchscreen, equipped with Klipper firm..
CHF145,00 Ex Tax: CHF134,14
Creality High Flow upgrade Kit for Ender-3 S1/Pro/Plus
With this kit, you can upgrade your Ender-3 S1/S1 Pro to enable higher printing speeds. Nowadays, wi..
CHF47,90 Ex Tax: CHF44,31
CR Touch Auto Leveling Kit with 1.5m Cable
CR-Touch is an automatic leveling sensor from Creality for 3D printers. With this sensor, the print ..
CHF42,90 Ex Tax: CHF39,69
USB 2.0 Cable Type C black angled 1.8m
The USB 2.0 Type-C cable is ideal for connecting your Ender 3 S1 Pro to the Creality Sonicpad. With ..
CHF15,90 Ex Tax: CHF14,71
Ender 3 S1/ S1 Pro replacement Cable Kit
This original replacement kit by Creality includes all essential cables for Ender 3 S1 and Ender 3 S..
CHF28,90 Ex Tax: CHF26,73
Ender-3 S1 Y-axis Belt Length 760mm
This GT2 belt serves as a replacement for the Y-Axis belt of the Ender-3 S1 and Ender-3 S1 Pro. The ..
CHF6,90 Ex Tax: CHF6,38
Creality Ender-3 V2 NEO 220×220×250mm 3D Printer
The Ender-3 V2 Neon 3D printer allows you to create your own objects from different materials such a..
CHF239,00 Ex Tax: CHF221,09
Creality Ender-5 S1 220x220x280mm 3D Printer
The Ender-5 S1 is an FDM desktop 3D printer from Creality, notable for its high printing speed of up..
CHF299,00 Ex Tax: CHF276,60
235x235mm PEI Magnetic Spring Steel Build Plate for Ender-3 S1
This PEI magnetic spring steel print plate with a structured surface from Creality fits the Ender-3 ..
CHF39,90 Ex Tax: CHF36,91
Sprite Extruder Replacement Mechanical Kit
This Sprite Extruder spare part, manufactured by Creality, can be installed on the Ender-3 S1 Plus, ..
CHF37,90 Ex Tax: CHF35,06
Creality Spool Holder Ender-3 S1
The Creality spool holder can be installed on the Ender-3 S1, Ender-3 S1 Pro, Ender-3 S1 Plus, or CR..
CHF18,90 Ex Tax: CHF17,48
Creality Nozzle Set MK Brass 8 Pieces
This nozzle set includes 8 nozzles from 0.25mm to 0.8mm. These original Creality nozzles are compati..
CHF29,90 Ex Tax: CHF27,66
Creality Nozzle Set MK Coated Copper 8 pieces
This nozzle set includes 8 nozzles from 0.25mm to 0.8mm. These original Creality nozzles are suitabl..
CHF44,90 Ex Tax: CHF41,54
Creality Ceramic Hotend Kit for Sprite Extruder
Discover the Creality Ceramic Hotend Kit for your Sprite Extruder - an excellent upgrade that takes ..
CHF35,90 Ex Tax: CHF33,21
CR Touch Auto Leveling Sensor
CR-Touch is an automatic leveling sensor from Creality for 3D printers. With this sensor, the print ..
CHF39,90 Ex Tax: CHF36,91
0.4mm MK8 CM2 Micro Swiss Nozzle
The 0.4mm MK8 Micro Swiss CM2 nozzle is made of high temperature resistant copper-chrome-zirconium a..
CHF24,90 Ex Tax: CHF23,03
0.6mm MK8 CM2 Micro Swiss Nozzle
The 0.6mm MK8 Micro Swiss CM2 nozzle is made of high-temperature resistant copper-chromium-zirconium..
CHF24,90 Ex Tax: CHF23,03
235x235 PEI Structured Double-Sided Magnetic Spring Steel Build Plate
This is a double-sided magnetic PEI print bed/print plate from Creality. One side of the spring stee..
CHF39,90 Ex Tax: CHF36,91
235x235mm K1 PEI Magnetic Spring Steel Building Plate Printing Platform
This magnetic spring steel print platform with fine PEI surface from Creality is specifically design..
CHF33,90 Ex Tax: CHF31,36
235x235mm K1 PEI Structured Magnetic Spring Steel Build Plate Printing Platform
This magnetic spring steel print platform with structured PEI surface from Creality is specifically ..
CHF36,90 Ex Tax: CHF34,14
Creality Sonic Pad Serial Adapter
The Creality Sonic Pad Serial Adapter is your key to seamless and enhanced communication between the..
CHF15,90 Ex Tax: CHF14,71
Creality Sprite Extruder PCB CRI-2161V10
The Creality Sprite Extruder Board CRI-2161V1.0 is a high-quality replacement part for your Creality..
CHF10,90 Ex Tax: CHF10,08
Creality K1C High-Speed 3D Printer
Discover the Creality K1C High-Speed 3D Printer, the perfect device for 3D printing beginners and pr..
CHF549,00 Ex Tax: CHF507,86
Tags: Creality, Ender, Ender-3 S1, Pro, Full metal, Full, metal, 300°C, Touch, CRTouch, BLtouch, ABL, automatic, leveling, leveling, dual-gear, dual tooth gear, Extuder, Direct, direct, Sprite, Beginner, beginners, pre-assembled, 3D.Printer, Printer, FDM, FFF, LPD, Plastic, LED, Lighting, PEI, 1001020398.