110x80x70mm IP67 Plastic Enclosure
This IP67 plastic enclosure is suitable for the Arduino UNO. The height is also sufficient for a board with a plugged-on shield. Inside there are two M4 brass threaded inserts 80 mm apart, to which a microcontroller or a 3D printed mounting plate can be screwed. For outdoor use, a pressure compensation gland is also recommended so that the enclosure stays sealed.
Recommended Accessories:
- Pressure equalization screw fitting M12 IP67
- Cable Gland M12 / IP68
- Cable gland M16 / IP68
- Cable gland M20 / IP68
- Step Drill Bit 4-20mm 3-pc. Set
Features:
- Protection class IP67
- Seal between lid and base
- Lid fastened with 4 plastic screws
- 2 M4 brass threaded inserts 80 mm apart for mounting circuit boards
Application Examples:
- Arduino UNO with or without shield
- Microcontrollers on a 3D printed mounting plate
- Sensors and controllers outdoors
Technical Data:
- Protection class: IP67
- Housing material: ABS
- Lid material: PC
- Colour: grey
- External dimensions: 110 × 80 × 70 mm (L × W × H)
- Internal dimensions: 101 × 71 × 65 mm (L × W × H)
- Threaded inserts inside: 2× M4, 80 mm apart
- Weight: 161 g
Scope of Delivery:
- 1× 110x80x70mm IP67 plastic enclosure
- 4× sturdy plastic screws
- 2× M4 mounting screws for the inside
110x80x70mm IP67 Plastic Enclosure
- Brand: purecrea
- Product Code: 421665
- Availability: In Stock
-
CHF12,90
- Ex Tax: CHF11,93
Related Products
Pressure equalization screw fitting M12 IP67
A waterproof housing is not always waterproof. Rapid temperature changes create pressure differences..
CHF4,90 Ex Tax: CHF4,53
Cable gland M16 / IP68
This cable gland leads cables into a housing or box and protects the entry against dust, water and p..
CHF1,90 Ex Tax: CHF1,76
Cable Gland M12 / IP68
This cable gland leads cables into a housing or box and protects the entry against dust, water and p..
CHF1,50 Ex Tax: CHF1,39
Step Drill Bit 4-20mm 3-pc. Set
This step drill set is used for drilling holes in plastic housings and for many other jobs in the wo..
CHF16,90 Ex Tax: CHF15,63
65x50x55mm IP67 Plastic Enclosure
This IP67 plastic housing has room for a Wemos D1 mini and is also suitable for other small Arduino ..
CHF4,90 Ex Tax: CHF4,53
180x80x70mm IP67 Plastic Housing
This IP67 plastic housing has room for an Arduino UNO, an Arduino Mega or a breadboard with an ESP82..
CHF13,90 Ex Tax: CHF12,86
95x65x55mm IP67 Plastic Enclosure
This IP67 plastic housing has room for an ESP8266 NodeMCU and is also suitable for other Arduino pro..
CHF10,90 Ex Tax: CHF10,08
110x80x70mm IP67 Transparent Plastic Housing
This transparent IP67 plastic housing is suitable for the Arduino UNO. The height is also sufficient..
CHF12,90 Ex Tax: CHF11,93
115x90x55mm IP66 Plastic Enclosure Grey
This grey IP66 plastic enclosure is suitable for the Arduino UNO. The height is also sufficient for ..
CHF10,90 Ex Tax: CHF10,08
Cable gland M20 / IP68
This cable gland leads cables into a housing or box and protects the entry against dust, water and p..
CHF1,90 Ex Tax: CHF1,76
110x80x70mm IP67 Grey Plastic Enclosure
This grey IP67 plastic enclosure is suitable for the Arduino UNO. The height is also sufficient for ..
CHF12,90 Ex Tax: CHF11,93
Tags: 110x80x70, Case, Housing, Box, Plastic box, Exterior housing, Waterproof, Plastic housing, Arduino, Arduino Uno, IP67, Condensation, Membrane, Screw connection, Seal, Tight, Rustproof, 110*80*70, ABS, threaded insert