UNIHIKER M10 - IoT Python Single Board Computer with Touchscreen

The UNIHIKER M10 from DFRobot is a single-board computer with Linux (Debian), a 2.8 inch touch display, Wi-Fi and Bluetooth. Python and the necessary libraries are preinstalled: it is connected to the computer via USB-C and can be programmed right away in the browser, with Jupyter Notebook, VS Code or Mind+. Light sensor, motion sensor and microphone are built in, further sensors connect to the Gravity ports or to the edge connector in micro:bit format.

With a microcontroller and camera for getting started with AI there is the UNIHIKER K10 AI Learning Board ESP32-S3 with Camera and Display.

Recommended Accessories:

• Multi Expansion Board for UNIHIKER M10/K10 and micro:bit

Features:

• RK3308 processor with four Cortex-A35 cores up to 1.2 GHz, 512 MB RAM, 16 GB eMMC
• Debian with preinstalled Python, programming in the browser, with Jupyter Notebook, VS Code, VIM, Thonny or Mind+
• PinPong library controls sensors and actuators directly from Python
• SIoT service for MQTT on the device, data stays stored locally
• 2.8 inch touch display with 240 × 320 pixels
• Built in: Home, A and B buttons, microphone, light sensor, buzzer, LED, accelerometer and gyroscope
• GD32VF103 co-processor (RISC-V) for the inputs and outputs
• Connections: USB-C, USB-A, microSD, Gravity 3-pin and 4-pin (I2C), edge connector in micro:bit format

Application Examples:

• Learning Python in school and training
• IoT and AI projects with data processing on the device
• Controlling robots
• Local web services and file sharing via SMB

Documentation:

• DFRobot Wiki DFR0706-EN
• UNIHIKER documentation
• DFRobot course: learn Python with graphical programming
• DFRobot course: SIoT projects with Python
• Mind+ for graphical programming
• Schematic (PDF)

Technical Data:

• Manufacturer: DFRobot
• Manufacturer SKU: DFR0706-EN
• Processor: Rockchip RK3308, 4 ARM Cortex-A35 cores, up to 1.2 GHz
• RAM: 512 MB DDR3
• Storage: 16 GB eMMC
• Operating system: Debian 10
• Wi-Fi and Bluetooth: RTL8723DS, Wi-Fi 2.4 GHz, Bluetooth 4.0
• Co-processor: GD32VF103C8T6, RISC-V, 108 MHz
• Display: 2.8 inch, touch, 240 × 320 pixels
• Edge connector: 19 I/O, I2C, UART, 2× SPI, 6× 12-bit ADC, 5× 10-bit PWM
• Gravity 3-pin: 3× 10-bit PWM, 2× 12-bit ADC; Gravity 4-pin: separate I2C channel
• Power supply: via USB-C only, 5 V 2 A
• Operating voltage: 3.3 V, current up to 2000 mA
• Dimensions: 51.6 × 83 × 13 mm
• Weight: 190 g

Scope of Delivery:

• 1× UNIHIKER - IoT Python single-board computer with touchscreen
• 1× USB-C cable
• 4× Silicone cable PH2.0-3P, plugs on both ends, 20 cm
• 2× Silicone cable PH2.0-4P, plugs on both ends, 20 cm