UNI-T UDP6720 Programmable DC Switching Power Supply 60V 100W

The UNI-T UDP6720 is a programmable switching-mode laboratory power supply with an output of 0 to 60 V and 0 to 5 A. The output power is limited to 100 W: the full 5 A is available up to 20 V, at 60 V it is approx. 1.6 A. Voltage and current are set in steps of 10 mV and 1 mA and shown on a 2.8-inch colour display, it can be controlled from a PC via RS232.

Recommended Accessories:

• 1 Pair of Laboratory Cables 32A 600V 150cm 2.5mm² Banana Plug 4mm
• 2 pcs. Crocodile clip / tapping clamp 15A for 4mm banana plug

Features:

• Output 0 to 60 V and 0 to 5 A, max. 100 W
• Setting resolution 10 mV and 1 mA
• Overvoltage (OVP) and overcurrent (OCP) protection
• List and delay function for programmed sequences
• Remote sense to compensate for voltage drop
• 2.8-inch colour display
• RS232 interface

Application Examples:

• Powering circuits in development and repair
• First power-up of circuits with current limitation
• Training and education
• Automated test sequences via the list function or from a PC

Documentation:

• User manual (PDF, English)
• UNI-T UDP6700: product page (UNI-T)

Technical Data:

• Manufacturer: UNI-T
• Type: UDP6720
• Design: switching mode, programmable
• Output voltage: 0 to 60 V
• Output current: 0 to 5 A
• Output power: max. 100 W
• Load regulation: < 0.01 % + 3 mV, < 0.01 % + 3 mA
• Line regulation: < 0.01 % + 3 mV, < 0.1 % + 3 mA
• Setting accuracy: ≤ 0.05 % + 10 mV, ≤ 0.2 % + 2 mA
• Readback accuracy: < 0.05 % + 10 mV, < 0.1 % + 2 mA
• Ripple and noise: < 2 mVrms, < 5 mArms
• Resolution: 10 mV, 1 mA
• Display: 2.8 inch colour LCD
• Interface: RS232
• Mains input: 110 V / 220 V AC ±10 %, 50/60 Hz
• Operating temperature: 0 to 45 °C
• Storage temperature: -20 to 70 °C
• Dimensions: 87 × 255 × 174 mm
• Weight: 2560 g

Scope of Delivery:

• 1× UNI-T UDP6720 laboratory power supply
• 1× power cable