SW3L-LS DN50 G2 LoRaWAN Flow Sensor 868MHz with Solar

The SW3L-LS from Dragino is an advanced LoRaWAN flow sensor, optimized for efficient monitoring of water usage in various environments. This sensor, supported by a combination of solar power and an additional battery, ensures reliable and long-lasting operation, making it ideal for autonomous outdoor use. In addition to traditional battery power, the SW3L-LS uses a solar cell for its power supply, thus reducing the need for frequent maintenance. Equipped with a powerful 48 MHz ARM microcontroller, 256KB flash, and 64KB RAM, this sensor provides the necessary computing capacity for demanding applications. Easy configuration via BLE and the ability to receive OTA updates significantly facilitates the management and maintenance of the system. With the SX1262 LoRa Core, the sensor provides an exceptionally wide range and high interference resistance, making it the ideal choice for a variety of IoT applications. Each sensor is equipped with a set of unique keys for LoRaWAN registrations, which are registered on a local LoRaWAN server. The sensor automatically connects after power up if network coverage is available.

Recommended Accessories:

• LoRa Gateway

Features:

• Solar panel with additional battery for sustainable operation
• G2 inch thread DN50
• Supports LoRaWAN v1.0.3 Class A protocol
• EU868 frequency band
• SX1262 LoRa Core for far-reaching and interference-resistant communication
• Open-Source Hardware/Software
• Simple configuration using AT commands via Bluetooth V5.1, LoRaWAN downlink, or UART
• Support for wireless OTA firmware update
• Optimized housing with new pressure compensation screw
• External LoRa antenna

Application Examples:

• Water control in buildings
• Flow sensors for urban water systems
• Monitoring of agricultural irrigation systems

Links and Download:

• Dragino Wiki

Technical Data:

• Manufacturer: Dragino
• Manufacturer SKU: SW3L-LS-EU868-020
• Thread: G2 inch thread DN50
• Microcontroller:
  • MCU: 48 MHz ARM
  • Flash: 256KB
  • RAM: 64KB
• General DC characteristics:
  • Supply voltage: 0.9W solar panel and built-in battery
• Operating temperature: -40 ~ 85°C
• LoRa specifications:
  • Frequency range: 868MHz / EU868
  • Maximum +22 dBm constant RF output
  • RX sensitivity: up to -139 dBm
• Flow sensor DW-010:
  • Diameter: G2 inch / DN50
  • 12 pulses correspond to 1 liter
  • Cable length: 45cm
• Battery:
  • Type: Li-on battery (rechargeable)
  • Capacity: 3000mAh
• Power consumption
  • Sleep mode: 74µA at 3.8V
  • LoRa transmit mode: 236mA at 20dBm, 206mA at 14dBm
• Dimensions: 108 x 102 x 40mm
• Weight: 492g

Scope of delivery:

• 1x SW3L-LS DN50 G2 LoRaWAN Flow Sensor 868MHz with Solar
• 1x External 868MHz Antenna