RP2040-Matrix 5x5 RGB LED based on Raspberry Pi Pico MCU

The RP2040 matrix is an MCU board with an LED display that strongly resembles a Pico and is based on the Raspberry Pi RP2040. This board can be directly soldered onto carrier boards and comes with 20 multifunctional GPIO pins. It is equipped with a 5x5 RGB LED matrix that can be used for colorful lighting displays or simple images. 

Features: 

• Energy-saving sleep and standby mode. 
• Drag-and-drop programming with mass storage via USB. 
• Precise clock and timer on the chip. 
• Accelerated floating point libraries on the chip. 
• 8 × programmable I/O state machines (PIO) for the support of specific peripheral devices. 

Documentation: 

• Waveshare Wiki

RP2040-Matrix Pinout:

Technical Details: 

• Manufacturer: Waveshare 
• Manufacturer SKU: 24594 
• Microcontroller: RP2040 
• Processor: Dual Core Arm Cortex M0+ 
• Processor Clock Rate: 133MHz 
• SRAM: 264KB 
• Flash Memory: 2MB 
• LED Matrix: 5x5 RGB LEDs 
• Connection: USB-Type-C 1.1 
• Supported Programming Languages: C/C++, MicroPython, Arduino 
• PINs: 20x Multi-Function GPIO (of which 16x PWM), 1x GND, 1x 5V, 1x 3V3 
• Interfaces: 2x SPI, 2x I2C, 2x UART, 4x 12-bit ADC 
• Buttons: 1x Boot, 1x Reset 
• Dimensions: 23.5 x 18 x 6.2mm 
• Weight: 3.6g 

Delivery Scope: 

• 1x RP2040-Matrix 5x5 RGB LED Raspberry Pi Pico based MCU