PLA+ Filament 1.75mm Silver 1Kg eSun

PLA Plus Silver PLA+175S1 from eSun is based on a standard PLA filament. The following features have been optimized:

• Brittleness
• Tensile strength
• Layer adhesion
• Flame retardant
• Odorless during printing

eSUN PLA+ is considered by many as the new standard for PLA printing and also offers you a very good price-performance ratio. It is not only easier to process, but you also produce better 3D print parts with smooth and clean surfaces.

Conclusion: PLA+ is very suitable for beginners and professionals, is easy to print and also offers you good adhesion properties and almost no warping effect when printing! PLA+ is also a very good alternative to ABS, if something has to be break-resistant, e.g. printed children's toys! PLA+ has very good elongation and bending strength to resist falls, shocks and breaks caused by elongation. There are also no odors when printing with PLA+, as is the case with ABS.

Features PLA+:

• Very resistant
• Easy to print
• Very good adhesion to the print bed
• Top print quality and great price-performance ratio

Recommended print parameters for PLA+:

• Print temperature: 205-225°C Recommended: 210°C
• Heated bed temperature: 25-70°C Recommended: 60°C
• Fan speed: 50 to 100% Recommendation: 80%
• Feed rate: 40-60mm/s (2400-3600mm/min)

Download:

• eSun Product Manual
• Safety data sheet PLA+
• Data sheet Filament

Technical Details:

• Color: Silver 
• Item number: PLA+175S1
• Weight filament: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Print temperature: 205-225°C
• Density: 1.24g/cm3
• Melt flow index: 2g/10min
• Impact resistance: 7kJ/m²
• Elongation at break:29%
• Tensile strength: 60MPa
• Form stability: 52°C
• Spool size diameter outside: 20cm
• Spool width: 6.7cm
• Diameter inside (hole): 5.3cm
• Weight filament: 1000g
• Weight empty spool: 278g
• Total weight: 1460g
• Dimension: 205 x 215 x75mm

Delivery content:

• 1x PLA+ Filament 1.75mm Silver 1Kg eSun