micro:IoT IoT Expansion Board for micro:bit

The DFRobot micro:IoT is a cloud-shaped expansion board that brings the BBC micro:bit into the Internet of Things. The board carries a Wi-Fi IoT module, an OLED display, two motor drivers, two servo ports, six IO ports, two I2C, a serial interface, buzzer and three RGB LEDs. Together with the DFRobot Easy IoT platform, IFTTT or ThingSpeak, readings can be sent and devices switched remotely. Power comes from a CR123A battery with charging circuit or an external source, a PMMA cover protects the components.

Important: Only use rechargeable lithium-ion CR123A batteries with 3.6 V, no 3 V CR123A lithium batteries. Charging non-rechargeable batteries is dangerous. The battery and the micro:bit are not included.


Recommended Accessories:


Features:

  • 2.4 GHz Wi-Fi IoT module for Easy IoT, IFTTT and ThingSpeak
  • OLED display on the board
  • 2 motor drivers for DC motors, 2 servo ports
  • 6 IO ports in Gravity format, 2× I2C, 1× serial
  • 3 RGB LEDs, buzzer and switch on the board
  • CR123A battery holder with charging circuit, short-circuit and reverse polarity protection
  • PMMA cover
  • Programming with MakeCode, Mind+ and Python

Application Examples:

  • Weather display and light and temperature monitoring
  • Remote control of watering or clothes airer
  • Sending messages and e-mails via IFTTT

Documentation:



Technical Data:

  • Manufacturer: DFRobot
  • Manufacturer SKU: MBT0012
  • Power supply: CR123A Li-ion battery 3.6 V (rechargeable) or external supply
  • STM8S I2C address: 0x01
  • Digital output: 0 V / 3.3 V
  • Analog input: 0 to 3.3 V DC
  • micro:bit pins: P0, P1, P2, P8, P12, P16
  • Interfaces: 2× I2C, 1× serial, Gravity
  • Drives: 2 motor ports, 2 servo ports
  • Wi-Fi status indicator: red not connected, blue connecting, green working, purple MQTT disconnected, white firmware update
  • Mounting: M3 holes
  • Dimensions: 148 × 112 × 20.5 mm
  • Weight: 104 g (DFRobot)

Scope of Delivery:

  • 1× micro:IoT expansion board

Write a review

Note: HTML is not translated!
    Bad           Good

micro:IoT IoT Expansion Board for micro:bit

  • Brand: DFRobot
  • Product Code: 423166
  • Availability: In Stock
  • CHF44,90

  • Ex Tax: CHF41,54

Related Products

BBC micro:bit Go V2

BBC micro:bit Go V2

The BBC micro:bit Go V2 is a set with the small micro:bit V2 computer board, USB cable, battery hold..

CHF24,90 Ex Tax: CHF23,03

micro:IO IO Expansion Board for BBC micro:bit

micro:IO IO Expansion Board for BBC micro:bit

This DFRobot IO expansion board for the BBC micro:bit breaks out the IO pins to 3-pin headers with s..

CHF9,90 Ex Tax: CHF9,16

BBC micro:bit V2

BBC micro:bit V2

The BBC micro:bit V2 is a small computer for getting started with programming. The board has a 5 × 5..

CHF16,90 Ex Tax: CHF15,63

micro:bit Environment Science Expansion Board V2.0

micro:bit Environment Science Expansion Board V2.0

This tree-shaped DFRobot expansion board turns the BBC micro:bit into an environmental measuring sta..

CHF109,00 Ex Tax: CHF100,83

micro: Breadboard for micro:bit

micro: Breadboard for micro:bit

The DFRobot micro: Breadboard is an expansion board for the BBC micro:bit with a breadboard for gett..

CHF19,90 Ex Tax: CHF18,41

Gravity IoT Starter Kit for micro:bit

Gravity IoT Starter Kit for micro:bit

The Gravity IoT Starter Kit from DFRobot brings the micro:bit onto the internet. It contains a micro..

CHF76,90 Ex Tax: CHF71,14

micro:bit Circular RGB LED Expansion Board

micro:bit Circular RGB LED Expansion Board

This round DFRobot expansion board carries 24 WS2812 RGB LEDs in a circle and turns the BBC micro:bi..

CHF19,90 Ex Tax: CHF18,41

Tags: micro:IoT, IoT, expansion board, micro:bit, education, school, Wi-Fi, OLED, motor drive, servo, programming, Li-Ion battery, RGB-LED, PMMA, MakeCode, Mind+, Python, GPIO, cloud, DFRobot, BBC, micro, wifi, wlan, MBT0012