Luckfox PicoKVM KVM Remote Tool with 1.54 Inch Touchscreen

The Luckfox PicoKVM is a compact IP-KVM device for network-based remote control of PCs, servers, and development boards without additional software on the target system. The device is based on the Rockchip RV1106G3 SoC with an ARM Cortex-A7 core at 1.2 GHz, 256 MB DDR3 RAM, and 8 GB eMMC flash memory. The HDMI input captures the image signal of the controlled system with up to 1920 × 1080 pixels at 60 fps and transmits it via H.264 hardware encoding with a latency of 80 to 200 ms.

Recommended Accessories:

• Luckfox PicoKVM Ext PCIe Expansion Card for Remote Power Management
• 1.5m HDMI Dual-Male Cable
• USB 3.0 Type C Cable 1m black
• 2m S/FTP Ethernet Patch Cable RJ45 Cat.6 Network Cable

Features:

• HDMI video capture up to 1920 × 1080 at 60 fps with H.264 or H.265 hardware encoding and 80 to 200 ms latency enables smooth remote control
• USB-HID emulation for keyboard, mouse, and USB mass storage allows full control including BIOS and UEFI access
• Web browser-based interface with support for Tailscale, ZeroTier, WireGuard, NetBird, Frp and Cloudflare enables secure remote access without port forwarding
• 1.54-inch touch display shows connection status, IP address, and system state directly on the device
• I/O expansion header with GPIO, UART, and I2C enables physical control of the target system's power supply, for example with the Luckfox PicoKVM Ext
• Wake-on-LAN, web terminal, and serial terminal complement the range of functions for complete out-of-band management
• MCP server in the firmware: AI agents can capture screenshots and operate the mouse and keyboard of the target computer (source code on GitHub)

Use Cases:

• Remote access to BIOS and UEFI of home servers without physical access to the server room
• Remote installation of an operating system on a PC or development board via virtual USB drive
• Maintenance and troubleshooting of crashed systems without on-site intervention
• Remote control of development boards like Raspberry Pi or single board computers without desktop environment
• Building a cost-effective remote management system for small server farms or homelab environments
• Switching a desktop PC on and off and restarting it remotely with the Luckfox PicoKVM Ext
• Operating a computer by AI agents via the firmware's MCP server

Documentation:

• Luckfox Wiki – PicoKVM Introduction
• PicoKVM firmware source code on GitHub
• Luckfox Wiki: Remote access
• Luckfox Wiki: Remote OS installation
• Luckfox Wiki: Remote power-on with PicoKVM Ext

Technical Specifications:

• Manufacturer: Luckfox
• Manufacturer SKU: 30583
• SoC: Rockchip RV1106G3
• CPU: ARM Cortex-A7, 1.2 GHz
• Memory: 256 MB DDR3
• Storage: 8 GB eMMC
• Operating System: Buildroot Linux (Kernel 5.10)
• HDMI Input: Up to 1920 × 1080 @ 60 fps
• Video Encoding: H.264/AVC, H.265/HEVC (Hardware)
• Video Latency: 80–200 ms
• Audio Transmission: Yes (UAC)
• USB-HID Emulation: Keyboard, Mouse, USB Mass Storage
• UEFI/BIOS Access: Yes
• Wake-on-LAN: Yes
• Web Terminal: Yes
• Serial Terminal: 1 Channel
• Remote Access: xEdge, Tailscale, ZeroTier, WireGuard, NetBird, Frp, Cloudflare
• Network: 10/100 Mbps Ethernet (RJ45)
• USB Port: USB-C (Power, HID, Programming)
• Display: 1.54 inch touch display, 240 × 240 pixels
• Storage Expansion: MicroSD card slot
• I/O Expansion: SH1.0 10-pin (GPIO, UART, I2C)
• Power Supply: 5 V via USB-C
• Power Consumption: Approx. 1.6 W
• Casing: Metal
• Product Dimensions: 48.5 × 48.5 × 29.0 mm
• Package Dimensions: 136 × 97 × 42 mm
• Gross Weight: 120 g

Scope of Delivery:

• 1× Luckfox PicoKVM KVM Remote Tool with 1.54 inch touchscreen