Luckfox PicoKVM KVM Remote Tool with 1.54 Inch Touchscreen

The Luckfox PicoKVM is a compact IP-KVM device for network-based remote control of PCs, servers, and development boards without additional software on the target system. The device is based on the Rockchip RV1106G3 SoC with an ARM Cortex-A7 core at 1.2 GHz, 256 MB DDR3 RAM, and 8 GB eMMC flash memory. The HDMI input captures the image signal of the controlled system with up to 1920 × 1080 pixels at 60 fps and transmits it via H.264 hardware encoding with a latency of 80 to 200 ms.

Recommended Accessories:

• Luckfox Boards, Cameras, and Displays

Features:

• HDMI video capture up to 1920 × 1080 at 60 fps with H.264 hardware encoding and 80 to 200 ms latency enables smooth remote control
• USB-HID emulation for keyboard, mouse, and USB mass storage allows full control including BIOS and UEFI access
• Web browser-based interface with support for Tailscale and ZeroTier enables secure remote access without port forwarding
• 1.54-inch touch display shows connection status, IP address, and system state directly on the device
• I/O expansion header with GPIO, UART, and I2C enables physical control of the target system's power supply
• Wake-on-LAN, web terminal, and serial terminal complement the range of functions for complete out-of-band management

Use Cases:

• Remote access to BIOS and UEFI of home servers without physical access to the server room
• Remote installation of an operating system on a PC or development board via virtual USB drive
• Maintenance and troubleshooting of crashed systems without on-site intervention
• Remote control of development boards like Raspberry Pi or single board computers without desktop environment
• Building a cost-effective remote management system for small server farms or homelab environments

Documentation:

• Luckfox Wiki – PicoKVM Introduction

Technical Specifications:

• Manufacturer: Luckfox
• Manufacturer SKU: 30583
• SoC: Rockchip RV1106G3
• CPU: ARM Cortex-A7, 1.2 GHz
• Memory: 256 MB DDR3
• Storage: 8 GB eMMC
• Operating System: Buildroot Linux (Kernel 5.10)
• HDMI Input: Up to 1920 × 1080 @ 60 fps
• Video Encoding: H.264 (Hardware)
• Video Latency: 80–200 ms
• Audio Transmission: Yes (UAC)
• USB-HID Emulation: Keyboard, Mouse, USB Mass Storage
• UEFI/BIOS Access: Yes
• Wake-on-LAN: Yes
• Web Terminal: Yes
• Serial Terminal: 1 Channel
• Remote Access: xEdge, Tailscale, ZeroTier
• Network: 10/100 Mbps Ethernet (RJ45)
• USB Port: USB-C (Power, HID, Programming)
• Display: 1.54 inch touch display, 240 × 240 pixels
• Storage Expansion: MicroSD card slot
• I/O Expansion: SH1.0 10-pin (GPIO, UART, I2C)
• Power Supply: 5 V via USB-C
• Power Consumption: Approx. 1.6 W
• Casing: Metal
• Product Dimensions: 48.5 × 48.5 × 29.0 mm
• Package Dimensions: 136 × 97 × 42 mm
• Gross Weight: 120 g

Scope of Delivery:

• 1× Luckfox PicoKVM KVM Remote Tool with 1.54 inch touchscreen