2pcs IPEX to RP-SMA Female Adapter

This DFRobot adapter cable runs from an IPEX socket (MHF1, also called U.FL) on the board to an RP-SMA socket (RP-SMA female). The RP-SMA socket has an external thread with a nut and can be mounted in an enclosure wall. An antenna with an RP-SMA plug (RP-SMA male) is screwed onto it. The coaxial cable is 10 cm long and the contacts are gold-plated. The set contains 2 cables.

For antennas with a standard SMA plug there is the cable with an SMA socket: IPEX to SMA Female Adapter 2pcs.

Note: The RP-SMA socket looks like an SMA socket but has a pin in the centre instead of a sleeve. Antennas with an SMA plug only fit via an RP-SMA male to SMA female adapter. The IPEX plug fits MHF1 and U.FL sockets, not the smaller MHF4 sockets.

Recommended Accessories:

• RAK 2.8dBi LoRa Antenna RP-SMA Male 863-870MHz
• 2dBi SubG LoRa Antenna 868MHz
• Adapter RP SMA Male to SMA Female

Features:

• IPEX MHF1 (U.FL) to RP-SMA socket with centre pin
• RP-SMA socket with thread and nut for mounting in an enclosure wall
• 1.13 mm coaxial cable with dense shielding, flexible
• Gold-plated contacts, 24 h salt spray test
• Frequency range 0 to 5 GHz

Application Examples:

• External antenna with RP-SMA plug for WiFi, LoRa, GPS, 4G and 5G modules with IPEX connector
• Antenna connection through the enclosure wall
• LoRa nodes with an RP-SMA antenna outside the enclosure

Documentation:

• DFRobot FIT0872 product page

Technical Data:

• Manufacturer: DFRobot
• Manufacturer SKU: FIT0872
• Connectors: IPEX MHF1 plug / RP-SMA socket (female)
• Frequency range: 0 to 5 GHz
• Standing wave ratio: ≤ 1.5
• Impedance: 50 Ω
• Power: 10 W
• Cable: coax 1.13 mm, black
• Length: 100 ± 3 mm
• Plug retention force: ≥ 16 N
• Salt spray test: 24 h
• Operating temperature: -30 to +70 °C
• Weight: 9 g

Scope of Delivery:

• 2× adapter cable IPEX to RP-SMA female 10 cm