LilyGo T-Display-P4 ESP32-P4 with 4.1-inch AMOLED Display and 868MHz LoRa

The LilyGo T-Display-P4 is a powerful development platform based on the ESP32-P4 application processor. The board combines a high-resolution 4.1-inch AMOLED touch display with a resolution of 568 × 1232 pixels and a MIPI-DSI interface. An ESP32-C6 is used as a wireless coprocessor, providing Wi-Fi and Bluetooth functionality via an SDIO connection. For long-range wireless communication, a LoRa module based on the SX1262 (HPD16A module) is integrated, operating in the 868 MHz frequency band. Additionally, the board features a GPS module (L76K), an Ethernet controller (IP101GRI with RMII), an audio codec (ES8311) with amplifier and electret condenser microphone, and a 9-axis motion sensor (ICM20948). Further features include a real-time clock (PCF8563), a vibration motor (AW86224AFCR), a battery charging controller with NTC support, and a battery status display via the BQ27220. The board supports MIPI-CSI cameras like the OV2710, offers an SD card slot with SDMMC and SPI connectivity, and provides an I2C IO expansion via the XL9535. The main processor includes 16 MB of flash memory, while the ESP32-C6 coprocessor comes with 4 MB of flash. Development is supported via the ESP-IDF framework from version 5.5.4, with Arduino support for the ESP32-P4 currently being experimental. There is currently no Meshtastic or MeshCore firmware for the T-Display-P4; the LoRa radio is controlled by your own program. A keyboard expansion board is available separately, featuring a keyboard, backlight, and T-MixRF interfaces for Sub-GHz radio, 2.4 GHz, and NFC. Besides the internal LoRa antenna there is an MMCX connector, and the matching dipole antenna is included. A 1000 mAh lithium polymer battery is built in and is charged via the left USB-C port, the right one is used for programming.

Important: In Switzerland, a maximum of 25 mW (14 dBm) usually applies in the 868 MHz band. The transmit power is set in the program.


Recommended Accessories:


Features:

  • High-performance ESP32-P4 processor with 16 MB flash forms the basis of the development platform.
  • The 4.1-inch AMOLED touch display with 568 × 1232 pixels is driven via MIPI-DSI.
  • Integrated LoRa module (SX1262) enables long-range wireless communication in the 868 MHz band.
  • The ESP32-C6 coprocessor provides Wi-Fi and Bluetooth connectivity.
  • GPS, Ethernet, audio, IMU, RTC, and camera interfaces are directly integrated on the board.
  • Development is supported via the ESP-IDF framework from version 5.5.4.

Application Examples:

  • Prototyping IoT gateways with LoRa connectivity and Ethernet.
  • Building a portable GPS tracker with AMOLED display and long-range wireless communication.
  • Developing sensor dashboards with real-time data display on the touchscreen.
  • Implementing edge AI applications with camera connectivity via MIPI-CSI.
  • Custom LoRa communication device with large touch display, map and GPS position.

Documentation:



Technical Specifications:

  • Manufacturer: LilyGo
  • Manufacturer SKU: H753
  • Main Processor: ESP32-P4
  • Flash Memory (Main Processor): 16 MB
  • Coprocessor: ESP32-C6-MINI-1U / ESP32-C6-FH4
  • Flash Memory (Coprocessor): 4 MB
  • Wireless Connectivity: Wi-Fi, Bluetooth (via ESP32-C6)
  • Display: 4.1-inch AMOLED, 568 × 1232 pixels, MIPI-DSI, capacitive touch (GT9895)
  • Display Controller: RM69A10
  • LoRa Chip: SX1262 (HPD16A module)
  • LoRa Frequency: 868 MHz
  • LoRa Interface: SPI
  • GPS Module: L76K (UART)
  • Audio Codec: ES8311 (I2S)
  • Audio Amplifier: NS4150B
  • Microphone: Electret Condenser Microphone
  • Ethernet Controller: IP101GRI (RMII)
  • IMU: ICM20948 (I2C)
  • RTC: PCF8563 (I2C)
  • Vibration Motor: AW86224AFCR (I2C)
  • Charging Controller: LGS4056H with NTC support
  • Battery Status Display: BQ27220 (I2C)
  • Battery: lithium polymer, 1000 mAh, built in
  • USB: 2× USB-C (left charging, right data and programming)
  • Camera Interface: MIPI-CSI (OV2710)
  • SD Card Slot: SDMMC / SPI
  • IO Expansion: XL9535 (I2C)
  • Antenna: internal, plus MMCX connector (MMCX1) for the dipole antenna
  • Development Framework: ESP-IDF >= v5.5.4
  • Package Dimensions: 145 × 110 × 50 mm
  • Gross Weight: 200 g

Contents:

  • 1× LilyGo T-Display-P4 ESP32-P4 with 4.1-inch AMOLED Display and 868MHz LoRa
  • 1× LoRa dipole antenna (MMCX)

Safety and disposal instructions

Charge only with a suitable charger. Do not short-circuit, open, damage or heat the battery above 60 °C. Keep out of reach of children. Do not use if damaged or deformed.

Disposal: Batteries and accumulators do not belong in household waste. Free return to us or any sales point – see Return & Disposal.


Write a review

Note: HTML is not translated!
    Bad           Good

LilyGo T-Display-P4 ESP32-P4 with 4.1-inch AMOLED Display and 868MHz LoRa

  • Brand: Lilygo
  • Product Code: 426003
  • Availability: Out Of Stock
  • CHF119.00

  • Ex Tax: CHF110.08

Related Products

LilyGo T-Display-S3 ESP32-S3 with 1.9 Inch Display

LilyGo T-Display-S3 ESP32-S3 with 1.9 Inch Display

The LilyGo T-Display-S3 is a development board with the ESP32-S3R8 (dual-core Xtensa LX7), Wi-Fi and..

CHF22.90 Ex Tax: CHF21.18

LilyGo T-Display ESP32 16MB CH9102F with 1.14 Inch Display

LilyGo T-Display ESP32 16MB CH9102F with 1.14 Inch Display

The LilyGo T-Display is a development board with an ESP32 (dual-core Xtensa LX6), Wi-Fi and Bluetoot..

CHF18.90 Ex Tax: CHF17.48

LilyGo T-Embed ESP32-S3 with Encoder and Display

LilyGo T-Embed ESP32-S3 with Encoder and Display

The LilyGo T-Embed is a development board in a housing with the ESP32-S3 (16 MB flash, 8 MB PSRAM), ..

CHF39.90 Ex Tax: CHF36.91

LilyGo T-Display-S3 Touch ESP32-S3 with 1.9 Inch Touchscreen

LilyGo T-Display-S3 Touch ESP32-S3 with 1.9 Inch Touchscreen

The LilyGo T-Display-S3 Touch is a development board with the ESP32-S3R8 (dual-core Xtensa LX7), Wi-..

CHF31.90 Ex Tax: CHF29.51

LilyGo T5 S3 E-Paper 3.5 Inch Pro with Lora 868MHz and GPS

LilyGo T5 S3 E-Paper 3.5 Inch Pro with Lora 868MHz and GPS

With the T5 S3 E-Paper Pro, you get a versatile development board that's ideal for smart application..

CHF105.00 Ex Tax: CHF97.13

LilyGo T-Deck Plus ESP32-S3 868MHz LoRa module with 2.8-inch display and external antenna for Meshtastic

LilyGo T-Deck Plus ESP32-S3 868MHz LoRa module with 2.8-inch display and external antenna for Meshtastic

Discover the powerful LilyGo T-Deck Plus with the ESP32-S3 and integrated 868MHz LoRa technology for..

CHF89.90 Ex Tax: CHF83.16

LilyGo T-Deck Pro 868MHz LoRa Module with 2.8 Inch E-Ink Display

LilyGo T-Deck Pro 868MHz LoRa Module with 2.8 Inch E-Ink Display

The LilyGo T-Deck ESP32-S3 is a powerful all-in-one module with an integrated 2.8-inch E-Ink display..

CHF99.00 Ex Tax: CHF91.58

LILYGO TTGO T-Lora Pager ESP32-S3 868mhz IPS LCD

LILYGO TTGO T-Lora Pager ESP32-S3 868mhz IPS LCD

The LilyGO T-LoRa Pager K257 is an innovative handheld device based on the ESP32-S3, integrating mod..

CHF89.90 Ex Tax: CHF83.16

LilyGo TTGO T-Display ESP32 16MB 1.9 Inch

LilyGo TTGO T-Display ESP32 16MB 1.9 Inch

The LILYGO T-Display Bar is a compact ESP32-S3 development board with a distinctive elongated form f..

CHF35.90 Ex Tax: CHF33.21

LilyGo TTGO T-Display ESP32-S3 Pro LR1121 LoRa 868MHz with 2.33 inch Display

LilyGo TTGO T-Display ESP32-S3 Pro LR1121 LoRa 868MHz with 2.33 inch Display

The LILYGO T-Display S3 Pro LR1121 is a fully-equipped development board for demanding IoT and Mesht..

CHF69.90 Ex Tax: CHF64.66

LilyGo TTGO T3 ESP32-S3 V1.3 868MHz with 0.96 inch display

LilyGo TTGO T3 ESP32-S3 V1.3 868MHz with 0.96 inch display

The LILYGO T3 S3 V1.3 is a versatile LoRa development board based on the ESP32-S3 microcontroller wi..

CHF21.90 Ex Tax: CHF20.26

LilyGo T-Keyboard K270 for T-Display-P4 with CC1101, nRF24 and NFC

LilyGo T-Keyboard K270 for T-Display-P4 with CC1101, nRF24 and NFC

The K270 keyboard expansion turns the LilyGo T-Display-P4 ESP32-P4 with 4.1-inch AMOLED Display and ..

CHF69.90 Ex Tax: CHF64.66

Tags: ESP32-P4, LilyGo, T-Display-P4, AMOLED, LoRa, SX1262, ESP32-C6, development board, GPS, touch display, MIPI-DSI, IoT, microcontroller, Ethernet, IMU