LilyGo T-Display-C5 ESP32-C5 Wi-Fi 6 with 1.9 Inch Display

The LilyGo T-Display-C5 is a compact development board with the ESP32-C5, a RISC-V processor at 240 MHz with an additional low-power core for deep sleep. The ESP32-C5 offers dual-band Wi-Fi 6 on 2.4 and 5 GHz as well as Bluetooth 5 LE. The board carries a 1.9-inch IPS display with ST7789 driver and 170 × 320 pixels, driven via SPI. The capacitive touch controller CST816S captures input via I²C. 16 MB flash and 8 MB PSRAM are available for programs and graphics. A LiPo battery connects to the two-pin JST connector with 1.25 mm pitch and is charged via USB-C, while the AXP2602 monitors voltage, current, temperature and state of charge. The board is powered and programmed directly via USB-C (USB-Serial-JTAG). The button on GPIO0 or the I²C pins GPIO2 and GPIO3 wake it from deep sleep. Programming is done with Arduino IDE, PlatformIO or ESP-IDF from version 5.3; LVGL 9.2 is included in the examples. The repository provides examples for display, touch, battery monitoring and Wi-Fi access point.


Recommended Accessories:


Features:

  • Dual-band Wi-Fi 6 (2.4 and 5 GHz) and Bluetooth 5 LE with the ESP32-C5.
  • RISC-V at 240 MHz with low-power core for tasks during deep sleep.
  • 1.9-inch IPS display ST7789 with 170 × 320 pixels, touch controller CST816S.
  • 16 MB flash and 8 MB PSRAM for programs and graphical interfaces.
  • AXP2602 monitors voltage, current, temperature and state of charge of a battery.
  • USB-C with USB-Serial-JTAG, programmable with Arduino IDE, PlatformIO and ESP-IDF.

Application Examples:

  • Small status display with Wi-Fi 6 connection in the 5 GHz network
  • Battery-powered display with deep sleep for long runtimes
  • Prototyping LVGL user interfaces
  • Portable sensor station showing the readings
  • Integration into Home Assistant with ESPHome

Documentation:


Technical Specifications:

  • Manufacturer: LilyGo
  • Manufacturer SKU: H815
  • SoC: ESP32-C5, RISC-V 32-bit, 240 MHz, with LP core
  • Flash: 16 MB (Quad QIO)
  • PSRAM: 8 MB (Quad QIO)
  • Display: 1.9 inch IPS, ST7789, 170 × 320 pixels, RGB565
  • Display interface: 4-wire SPI, 3.3 V
  • Touch controller: CST816S, capacitive, I²C
  • Wi-Fi: 802.11ax/b/g/n, 2.4 and 5 GHz
  • Bluetooth: 5 LE
  • Antenna: external via IPEX (ESP32-C5-WROOM-1U), 2.4/5 GHz antenna included
  • Battery connector: JST 1.25 mm, 2-pin, charger TP4065
  • Battery monitoring: AXP2602
  • USB: Type-C, USB-Serial-JTAG, 5 V / 500 mA
  • Buttons: GPIO0 (user), boot
  • Dimensions: 62 × 26 × 10 mm
  • Package dimensions: 75 × 45 × 30 mm
  • Gross weight: 30 g

Contents:

  • 1× LilyGo T-Display-C5 ESP32-C5 Wi-Fi 6 with 1.9 Inch Display
  • 2× Pin header (not soldered)
  • 1× Battery cable JST 1.25 mm
  • 1× Wi-Fi antenna 2.4/5 GHz (IPEX)

Write a review

Note: HTML is not translated!
    Bad           Good

LilyGo T-Display-C5 ESP32-C5 Wi-Fi 6 with 1.9 Inch Display

  • Brand: Lilygo
  • Product Code: 426000
  • Availability: Out Of Stock
  • CHF15.90

  • Ex Tax: CHF14.71

Related Products

LilyGo T-Display-S3 ESP32-S3 with 1.9 Inch Display

LilyGo T-Display-S3 ESP32-S3 with 1.9 Inch Display

The LilyGo T-Display-S3 is a development board with the ESP32-S3R8 (dual-core Xtensa LX7), Wi-Fi and..

CHF22.90 Ex Tax: CHF21.18

LilyGo T-Display ESP32 16MB CH9102F with 1.14 Inch Display

LilyGo T-Display ESP32 16MB CH9102F with 1.14 Inch Display

The LilyGo T-Display is a development board with an ESP32 (dual-core Xtensa LX6), Wi-Fi and Bluetoot..

CHF18.90 Ex Tax: CHF17.48

LilyGo T-Display-S3 Touch ESP32-S3 with 1.9 Inch Touchscreen

LilyGo T-Display-S3 Touch ESP32-S3 with 1.9 Inch Touchscreen

The LilyGo T-Display-S3 Touch is a development board with the ESP32-S3R8 (dual-core Xtensa LX7), Wi-..

CHF31.90 Ex Tax: CHF29.51

LilyGo AMOLED T-Display-S3 ESP32-S3 with 1.9 Inch Display

LilyGo AMOLED T-Display-S3 ESP32-S3 with 1.9 Inch Display

This is a 1.91 inch 240x536 pixel AMOLED display module with an ESP32-S3 from Lilygo. The integrated..

CHF29.90 Ex Tax: CHF27.66

FireBeetle 2 ESP32-C5 IoT Development Board

FireBeetle 2 ESP32-C5 IoT Development Board

The DFRobot FireBeetle 2 with the ESP32-C5 uses dual-band Wi-Fi 6 on 2.4 and 5 GHz, according to DFR..

CHF9.90 Ex Tax: CHF9.16

LilyGo TTGO T-Display ESP32 16MB 1.9 Inch

LilyGo TTGO T-Display ESP32 16MB 1.9 Inch

The LILYGO T-Display Bar is a compact ESP32-S3 development board with a distinctive elongated form f..

CHF35.90 Ex Tax: CHF33.21

LilyGo T-Dongle-C5 ESP32-C5 with USB, Display, and Case

LilyGo T-Dongle-C5 ESP32-C5 with USB, Display, and Case

The LilyGo T-Dongle-C5 is a compact development board in USB Type-A stick format, based on the ESP32..

CHF18.90 Ex Tax: CHF17.48

ESP32-C5 WiFi 6 Development Board with 32MB Flash and 8MB PSRAM

ESP32-C5 WiFi 6 Development Board with 32MB Flash and 8MB PSRAM

The ESP32-C5 WiFi 6 Development Board by Waveshare is based on the ESP32-C5-WROOM-1 module and is de..

CHF14.90 Ex Tax: CHF13.78

ESP32-C5 Zero Development Board

ESP32-C5 Zero Development Board

The Waveshare ESP32-C5 Zero Development Board is an ultra-compact mini-format development board base..

CHF9.90 Ex Tax: CHF9.16

Tags: LilyGo, T-Display-C5, ESP32-C5, Wi-Fi 6, 5 GHz, RISC-V, ST7789, CST816S, AXP2602, Bluetooth LE, LVGL, ESPHome, Touch Display, Development Board, Dual Band