L298N Stepper Motor Driver / H-Bridge / DC Motor Driver
This driver module with L298N controls one stepper motor or two DC motors. It is suitable for projects with motors up to 2 A per bridge. Speed can be changed via PWM on ENA and ENB.
Recommended Accessories:
Features:
- 2 H-bridges with heat sink
- ENA and ENB jumpers: fitted for full speed, removed for PWM control
- Regulator jumper: remove above 12 V supply and feed 5 V to the +5V terminal
- Voltage drop in the bridge approx. 2 V
- Screw terminals for motors and power supply
Application Examples:
- Robot vehicles with two DC motors
- Control of one stepper motor
- Pumps and fans with DC motor
Documentation:
Technical Data:
- Chip: L298N
- Operating voltage: 5 V to 35 V
- Logic level: 5 V
- Current: max. 2 A per bridge
- Maximum power: 25 W
- Connections: OUT1 to OUT4, 5-35 V, GND, +5V, ENA, IN1 to IN4, ENB
- Dimensions: 43 × 43 × 26 mm
- Weight: 26 g
Scope of Delivery:
- 1× L298N stepper motor driver / H-bridge / DC motor driver
L298N Stepper Motor Driver / H-Bridge / DC Motor Driver
- Brand: purecrea
- Product Code: 420303
- Availability: In Stock
-
CHF8.90
- Ex Tax: CHF8.23
Related Products
Dupont Jumper Cable Set 10cm 60 pieces.
Dupont cables are used for quickly connecting components. They are also commonly called jumper cable..
CHF5.90 Ex Tax: CHF5.46
A4988 Stepper Motor Driver Module
The A4988 is a driver for stepper motors up to 2 A. It supports micro stepping up to 1/16 for fine, ..
CHF5.90 Ex Tax: CHF5.46
Robot Gear Motor 1:48 with Wheel
This gear motor with wheel brings movement to Arduino projects. It is suitable for robots and other ..
CHF4.90 Ex Tax: CHF4.53
DC Motor 1-6V 130-Size
This small size 130 DC motor runs on 1 V to 6 V and is suitable for fans, small vehicles and other p..
CHF2.90 Ex Tax: CHF2.68
2A Dual DC Motor Driver L298N
The DFRobot MDV motor driver uses the L298N to control two DC motors with 4.8 to 46 V and 2 A each, ..
CHF14.90 Ex Tax: CHF13.78
6V 105RPM 150:1 Micro Gear Motor with Encoder
This DFRobot micro gear motor has a 150:1 metal gearbox and a built-in Hall encoder. The encoder mea..
CHF13.90 Ex Tax: CHF12.86
15A Single DC Motor Driver
The DFRobot motor driver controls one DC motor with 12 to 36 V and up to 15 A continuous current wit..
CHF21.90 Ex Tax: CHF20.26
7A Dual DC Motor Driver
The compact DFRobot motor driver controls two DC motors with 7 to 24 V and 7 A continuous current ea..
CHF23.90 Ex Tax: CHF22.11
12A Dual DC Motor Driver
The DFRobot motor driver controls two DC motors with 6.5 to 37 V and 12 A continuous current each, b..
CHF34.90 Ex Tax: CHF32.28
Fermion TB6612FNG 2x1.2A DC Motor Driver
The small DFRobot module from the Fermion series carries the TB6612FNG and controls two DC motors wi..
CHF6.90 Ex Tax: CHF6.38
Gear Motor 1:48 Single Shaft
With this Single Shaft Gear Motor, you can bring movement to your Arduino projects. It's perfect for..
CHF3.90 Ex Tax: CHF3.61
DC 3V-6V 1:90 Full Metal Gear Motor
This is a compact gearbox motor with a 1:90 ratio. The motor is powered by 3V-6V, making it ideal fo..
CHF8.90 Ex Tax: CHF8.23
DFRobot Romeo V2 Robot Control Board with Motor Driver
The Romeo V2 from DFRobot is a control board for robots, compatible with the Arduino Leonardo, with ..
CHF25.90 Ex Tax: CHF23.96
Motor Control Shield for Arduino V1.0 with L293D
The Motor Control Shield with the L293D chip is your ideal choice when you want to control a small r..
CHF10.90 Ex Tax: CHF10.08
L298 Motor Shield for Arduino Rev3
The L298 Motor Shield for Arduino Rev3 is the ideal addition for your robotics and automation projec..
CHF14.90 Ex Tax: CHF13.78
Double BTS7960 43A Motor Driver H-Bridge
With the Double BTS7960 Motor Driver H-Bridge, you have a powerful module at your disposal, specific..
CHF15.90 Ex Tax: CHF14.71
Tags: H-Bridge, Motor Driver, Module, Double, L298N, Stepper Motor, DC Motor, Breakout, Arduino, Stepper, Stepper Motor Stage, DC Motor., PWM