JST 2.0 Lipo Connection Cable 15cm with Plug

This connection cable connects boards with a 2-pin JST-PH socket (2 mm pitch) to a LiPo battery or another voltage source. The cable ends are stripped and tinned and are soldered on.

Important: The white housing on the cable plugs into the JST-PH socket on the board. The housing itself contains socket contacts, which is why some manufacturers also call it a socket. It does not fit a battery plug of the same type. Check the polarity before connecting, it is not uniform with JST-PH.

Features:

• JST-PH housing with 2 socket contacts on the cable side
• Fits the 2-pin JST-PH socket on the board
• Other side stripped and tinned for soldering

Application Examples:

• Connecting a board with a JST-PH socket to a LiPo battery with solder connection
• Power supply via the JST-PH socket of a board

Technical Data:

• Type: JST PH 2.0, 2-pin (PHR-2)
• Pitch: 2 mm
• Length: 15 cm
• Cross section: 26 AWG
• Colours: red, black
• Weight: 1 g

Scope of Delivery:

• 1× JST 2.0 Lipo connection cable 15cm with plug