Search

Arduino Starter Kit German

The original Arduino Starter Kit is a comprehensive tool for learning electronics and programming, c..

CHF79.90 Ex Tax: CHF73.91

NodeMCU ESP12E Motor Shield L293D ESP8266

This motor shield controls 2 DC motors via an ESP8266 NodeMCU V1 and is suitable for example for a s..

CHF9.90 Ex Tax: CHF9.16

M5Stack GRBL Module 13.2 Stepmotor Driver

This is a 3-axis stepper motor driver from M5Stack. The module is a part of the stackable M5Stack se..

CHF32.90 Ex Tax: CHF30.43

ESP32 Serial Bus Servo Driver Expansion Board

With this servo driver board, you can control up to 253 serial bus servos via WiFi or Bluetooth. Thi..

CHF18.90 Ex Tax: CHF17.48

M5Stack Stepper Motor Driver Module 13.2

The M5Stack Stepper Motor Driver Module 13.2 V1.1 is a stepper motor driver adapted to the M5 Core. ..

CHF27.90 Ex Tax: CHF25.81

Serial Bus Servo Driver Adapter (A) USB/UART

Transform your next project into a masterpiece of automation with the Serial Bus Servo Driver Adapte..

CHF6.90 Ex Tax: CHF6.38

Serial Bus Servo Driver HAT

The Serial Bus Servo Driver HAT is the ideal solution for controlling up to 253 serial bus servos si..

CHF23.90 Ex Tax: CHF22.11

Direct Drive Servo Motor Driver HAT with ESP32

The Direct Drive Servo Motor Driver HAT is a versatile and powerful solution for controlling DDSM se..

CHF25.90 Ex Tax: CHF23.96

Double BTS7960 43A Motor Driver H-Bridge

With the Double BTS7960 Motor Driver H-Bridge, you have a powerful module at your disposal, specific..

CHF15.90 Ex Tax: CHF14.71

Aqara Roller Shade Driver E1 Zigbee 3.0

The Aqara Roller Shade Driver E1 Zigbee is an intelligent retrofit motor for chain-driven shades and..

CHF45.90 Ex Tax: CHF42.46

16-Channel PWM / Servo Driver I2C (PCA9685)

This breakout module uses the PCA9685 chip to control up to 16 servos via the I2C bus and occupies o..

CHF11.90 Ex Tax: CHF11.01

IRF520 MOSFET Driver Module

With this MOSFET driver module, larger loads can be switched with a 5 V signal, for example from an ..

CHF3.90 Ex Tax: CHF3.61

RAMPS 1.4 Control Board Arduino Mega Shield for RepRap

RAMPS 1.4 stands for RepRap Arduino Mega Pololu Shield. The shield makes the connections of an Ardui..

CHF15.90 Ex Tax: CHF14.71

CNC Shield A4988 Arduino for 3D Printers and Milling Machines (GRBL)

This shield for the Arduino UNO controls up to four stepper motors and is suitable for CNC machines ..

CHF8.90 Ex Tax: CHF8.23

A4988 Stepper Motor Driver Module

The A4988 is a driver for stepper motors up to 2 A. It supports micro stepping up to 1/16 for fine, ..

CHF5.90 Ex Tax: CHF5.46

Single Stepper Motor Control Board A4988

This board holds an A4988 driver for a single stepper motor. Micro stepping is set via DIP switches...

CHF3.90 Ex Tax: CHF3.61

L298N Stepper Motor Driver / H-Bridge / DC Motor Driver

This driver module with L298N controls one stepper motor or two DC motors. It is suitable for projec..

CHF8.90 Ex Tax: CHF8.23

Stepper motor set with motor and driver

This set consists of a 28BYJ-48 unipolar stepper motor and a matching ULN2003 driver module for smal..

CHF6.90 Ex Tax: CHF6.38

7-Segment XL Display Driver 12V TPIC6C596

This driver controls the XL 7-segment display from SparkFun. The display requires 12 V and therefore..

CHF6.90 Ex Tax: CHF6.38

DRV8825 Stepper Motor Driver Module

The DRV8825 is a driver module for stepper motors with microsteps down to 1/32. Without additional c..

CHF7.90 Ex Tax: CHF7.31

SSR-40DD 40A Solid State Relay DC to DC

This solid state relay switches DC loads up to 60 V and 40 A via a DC control signal of 3 to 32 V, f..

CHF15.90 Ex Tax: CHF14.71

TB6600 compatible stepper motor driver 4A

This TB6600 compatible stepper motor driver is suitable for larger stepper motors up to 3.5 A, peak ..

CHF24.90 Ex Tax: CHF23.03

DC Motor 1-6V 130-Size

This small size 130 DC motor runs on 1 V to 6 V and is suitable for fans, small vehicles and other p..

CHF2.90 Ex Tax: CHF2.68

Servo Driver HAT for Raspberry Pi 16-channel with I2C

This Waveshare HAT generates up to 16 PWM signals for servos with the PCA9685 and is controlled via ..

CHF18.90 Ex Tax: CHF17.48

HY-DIV268N Stepper Motor Driver 5A

The HY-DIV268N-5A stepper motor driver is suitable for larger stepper motors up to 5 A, for example ..

CHF32.90 Ex Tax: CHF30.43

Servo Driver HAT (B) for Raspberry Pi 16-Channel with I2C

This HAT from Waveshare generates up to 16 PWM signals for servos with the PCA9685 and is controlled..

CHF18.90 Ex Tax: CHF17.48

M5Stack Servo2 Module 16 Channel 13.2 PCA9685

The Servo2 Module 13.2 from M5Stack is a stackable module for the M5Stack Core and drives up to 16 s..

CHF19.90 Ex Tax: CHF18.41

SilentStepStick TMC2130 V2

The SilentStepStick TMC2130 V2 from Watterott is a stepper motor driver with the Trinamic TMC2130 in..

CHF13.50 Ex Tax: CHF12.49

Gravity MOSFET Driver Module 10A

The Gravity MOSFET module from DFRobot switches DC loads from 5 V to 36 V with a logic signal of 3.3..

CHF6.90 Ex Tax: CHF6.38

2A Dual DC Motor Driver L298N

The DFRobot MDV motor driver uses the L298N to control two DC motors with 4.8 to 46 V and 2 A each, ..

CHF14.90 Ex Tax: CHF13.78

Products meeting the search criteria