HC-12 SI4438 433MHz Radio Module UART
The HC-12 SI4438 offers you a simple way to realize a serial communication via 433MHz radio. Thus, you can exchange data between Arduinos or even send it to a Raspberry Pi. The HC-12 is a reliable radio module and has a very high range of up to 1000m outdoors. The module can be configured using AT commands. The module's configuration is retained even after power off and is not lost. To switch the module to AT mode, pin 5 "SET" must be connected to GND.
Recommended accessories:
Pin assignment HC-12 radio module:
Pin No. | Name | Function |
1 | VCC | 3.2V-5.5V DC |
2 | GND | Ground |
3 | RXD | UART Input (3.3V TTL) |
4 | TXD | UART Output (3.3V TTL) |
5 | SET | Settings Pin (10k Pull-Up) |
Documentation:
Technical details:
- Supply voltage: 3.2 - 5.5V DC
- Baud rate: 1.2Kbps to 115.2Kbps
- UART/TTL Interface
- Model: HC-12 SI4438
- Operating frequency range (433.4–473.0MHz)
- 400kHz channel width
- 100 possible channels
- Up to 1000m range with external antenna
- Power Max: 100mW (20dBm)
- Receiver sensitivity from -100dBm to -117dBm at 5000bps
- Dimension: 27.5 x 13.2mm x 2.2mm
- Weight: 2.5g
Scope of delivery:
- 1x HC-12 SI4438 433Mhz radio module
- 1x Antenna
HC-12 SI4438 433MHz Radio Module UART
- Brand: purecrea
- Product Code: 421560
- Availability: In Stock
-
CHF11,90
- Ex Tax: CHF11,01
Related Products
Tags: HC-12, SI4438, SI4463, Radio, Module, RF, 433Mhz, Transmitter, Receiver, Breakout, Wireless, Sockets, Radio Socket, Arduino, Kit, Sender, Receiver, 433, Raspberry, HC12