Gravity Expansion Board for Raspberry Pi Pico and Pico 2

The Gravity Expansion Board from DFRobot holds a Raspberry Pi Pico or Pico 2 and routes all pins to female headers and Gravity connectors. Sensors and modules of the Gravity series are plugged in without soldering. In addition there is a PH2.0 power input for 3.3 to 5.5 V, for example for battery operation, and a GDI connector for DFRobot displays. The Pico is not included and needs soldered pin headers.

Recommended Accessories:

• Raspberry Pi Pico Microcontroller
• Raspberry Pi Pico 2H Microcontroller with Headers
• Pin header male 1 X 40 pole RM 2.54mm straight short pin
• 2" 320x240 IPS TFT LCD Display with MicroSD

Features:

• Socket for Raspberry Pi Pico and Pico 2
• 13 digital ports: GP2, GP3, GP12 to GP22
• 3 analog ports: GP26 to GP28
• 2 × I2C, 2 × UART, 2 × SPI as separate connectors
• Power supply via PH2.0 with 3.3 to 5.5 V
• GDI connector (18-pin, FPC) for DFRobot displays, pinout in the wiki
• All pins also on female headers

Application Examples:

• Prototypes with Gravity sensors on the Pico
• Teaching and workshops without soldering
• Mobile projects with a display

Documentation:

• DFRobot Wiki DFR0848 with pinout
• Schematic (PDF)
• Getting started with Raspberry Pi Pico (PDF)

Technical Data:

• Manufacturer: DFRobot
• Manufacturer SKU: DFR0848
• For: Raspberry Pi Pico, Pico 2
• Digital IO: 13 (GP2, GP3, GP12 to GP22)
• Analog IO: 3 (GP26 to GP28)
• UART: 2
• I2C: 2
• SPI: 2
• Power supply: PH2.0, 3.3 to 5.5 V
• Display connector: GDI
• Dimensions: 73 × 63 × 12 mm
• Weight: 40 g

Scope of Delivery:

• 1× Gravity Expansion Board for Raspberry Pi Pico
• Raspberry Pi Pico is not included