Gravity Analog Rotary Potentiometer 300°
The analogue rotary potentiometer from DFRobot can be turned through 300° and outputs the position of the knob as a voltage. A microcontroller reads it at an analogue input, for example to set brightness, speed or volume. The module works at 3.3 V and 5 V.
Note: The connection cable can be converted to male pins with a Dupont cable M-M, so that it also fits an Arduino UNO.
Recommended Accessories:
- Dupont Cables M-M 10cm 20 Pieces
- Gravity IO Expansion Shield for Arduino V7.1
- Gravity 16Bit 4-Channel ADC Analog Digital Converter I2C ADS1115
Features:
- Rotation range 300°, knob fitted
- Potentiometer 10 kΩ, linear (DFRobot schematic)
- Output from 0 V up to the supply voltage
- Operation at 3.3 V and 5 V, for example with Arduino, ESP32 or micro:bit
- On the Raspberry Pi only readable via an ADC such as the ADS1115, as the Raspberry Pi has no analogue inputs
- Gravity PH2.0 3-pin connector, marked A for analogue
- 2 mounting holes 3 mm
Application Examples:
- Setting the brightness of LEDs
- Setting the speed of a motor
- Volume, pitch or controls for a MIDI instrument
- Setting menu values and thresholds
Documentation:
Technical Data:
- Manufacturer: DFRobot
- Manufacturer SKU: DFR0054
- Rotation range: 300°
- Potentiometer: 10 kΩ, linear (B103)
- Supply voltage: 3.3 V to 5 V
- Interface: analogue
- Connector: Gravity PH2.0 3-pin (signal, VCC, GND)
- Dimensions: 22 × 31 × 27 mm
- Weight: 14 g
Scope of Delivery:
- 1× Gravity Analog Rotary Potentiometer 300°
- 1× Gravity analogue sensor cable 3-pin, PH2.0 to Dupont socket, 30 cm
Gravity Analog Rotary Potentiometer 300°
- Brand: DFRobot
- Product Code: 422587
- Availability: In Stock
-
CHF5.90
- Ex Tax: CHF5.46
Related Products
Rotary Potentiometer Set 50 pcs. (500 Ohm - 1 MOhm)
This set contains 50 trimming potentiometers of the 3296W type in 10 common values from 500 Ω to 1 M..
CHF16.90 Ex Tax: CHF15.63
10K Ohm Linear Rotary Potentiometer 0.5W
This 10 kΩ linear potentiometer can be read at an analogue input of an Arduino to make settings. The..
CHF1.40 Ex Tax: CHF1.30
Knob for rotary potentiometer 6mm
This knob fits rotary potentiometers with a 6 mm shaft diameter and is simply pushed on. A white mar..
CHF0.60 Ex Tax: CHF0.56
Dupont Cables M-M 10cm 20 Pieces
Dupont cables are used to connect components quickly. They are also known as jumper cables, test cab..
CHF1.90 Ex Tax: CHF1.76
M5Stack Rotary Potentiometer Unit
The Rotary Potentiometer Unit from M5Stack (Unit Angle) has a 10 kOhm potentiometer with a knob. The..
CHF5.90 Ex Tax: CHF5.46
10K Ohm Trimmer Potentiometer 3386P-1-103 Linear
This 10 kΩ linear potentiometer can be read at an analogue input of an Arduino to make settings. For..
CHF1.30 Ex Tax: CHF1.20
Gravity 16Bit 4-Channel ADC Analog Digital Converter I2C ADS1115
The DFRobot Gravity ADC module measures four analog signals with the 16-bit ADS1115 converter and pa..
CHF19.90 Ex Tax: CHF18.41
Gravity IO Expansion Shield for Arduino V7.1
The Gravity IO Expansion Shield V7.1 from DFRobot brings all pins of an Arduino UNO out to coloured ..
CHF11.90 Ex Tax: CHF11.01
M5Stack 8Angle Potentiometer Unit with STM32F030
The UNIT 8Angle is a state-of-the-art input device with 8 adjustable potentiometers, an integrated S..
CHF17.90 Ex Tax: CHF16.56
Gravity Starter Kit for Arduino
The Gravity Starter Kit from DFRobot is meant for getting started with Arduino, at school and at hom..
CHF75.90 Ex Tax: CHF70.21
Tags: Rotary potentiometer, potentiometer, poti, sensor, Arduino, Analog, 3.3V, 5V, Raspberry PI, Gravity, DfRobot, rotary knob, rotary switch, rotary resistor, DFR0054













