WS2812B - 144LED/m LED NeoPixel Strip 6.9cm

This NeoPixel RGB LED strip carries 10 RGB LEDs (5 × 5 mm) per sales unit with integrated WS2812B driver on 6.9 cm, i.e. 144 LEDs per metre, on a flexible board strip with self-adhesive back. Several strips can be chained. Each LED is controlled individually via a single output of a microcontroller such as Arduino UNO, Mega or Nano.

Recommended Accessories:

• 3pin Connection Cable 15cm for WS2812 LED Strip
• 3pin connector for WS2812 LED Strip
• Electrolytic capacitor 1000 µF 25 V
• Logic Level Converter 2-Channel 5V / 3.3V

Features:

• With 6 pieces, 41.4 cm of strip with a total of 60 LEDs is delivered in one piece
• Can be cut and soldered at the marked points, the strip may be soldered at certain points
• Observe the data direction: on the strip the arrow points from DO to Din
• Each LED individually controllable via one data line
• Several modules can be chained (data output to data input)
• Library: FastLED or Adafruit NeoPixel
• 300 to 500 Ω resistor in the data line recommended
• With 3.3 V boards, a level shifter on the data line is recommended
• 500 to 1000 µF capacitor between plus and minus at the end of the strip recommended

Application Examples:

• Lighting for model making and enclosures
• Light effects with closely spaced LEDs, for example light bars and displays

Documentation:

• NeoPixel Überguide (Adafruit)
• FastLED library (GitHub)
• Adafruit NeoPixel library (GitHub)
• WS2812B datasheet (PDF)

Technical Data:

• Driver chip: WS2812B
• LED: 5050 RGB
• Operating voltage: 5 V DC
• Current consumption: up to approx. 60 mA per LED at full white
• Number of LEDs per metre: 144
• Connections: Din, DO, +5V, GND
• Board colour: white
• Width: 10 mm
• Thickness: 2 mm
• Weight (6.9 cm): 2 g

Scope of Delivery:

• 1× 10 LED 6.9 cm WS2812B NeoPixel Strip 144 LED/m