ESP32 C6 DevKitC-1-N8 Development Board 8MB SPI Flash

The ESP32-C6-DevKitC-1 from Espressif is an entry-level board with the ESP32-C6-WROOM-1 module (8 MB flash, antenna on the board). The ESP32-C6 with RISC-V core up to 160 MHz communicates via Wi-Fi 6 in the 2.4 GHz band, Bluetooth 5 (LE) and IEEE 802.15.4 for Zigbee 3.0 and Thread 1.3. Almost all pins are on pin headers on both sides, the board can be wired with jumper wires or placed on a breadboard.

Features:

ESP32-C6-WROOM-1 module with 8 MB SPI flash, RISC-V single core up to 160 MHz and low-power coprocessor
Two USB-C ports: one via the USB-UART bridge (up to 3 Mbit/s), one directly on the ESP32-C6 (USB 2.0 Full Speed, 12 Mbit/s)
Addressable RGB LED on GPIO8
Boot and Reset buttons
Jumper J5 for current measurement on the module
Power via USB-C, via the 5V and GND pins or via 3V3 and GND, only one way at a time

Application Examples:

Smart home devices with Zigbee, Thread or Matter
Sensor nodes and data loggers
Industrial automation
Prototypes on the breadboard

Documentation:

Technical Data:

Manufacturer: Espressif
Manufacturer SKU DFRobot: DFR1054
Module: ESP32-C6-WROOM-1, antenna on the board
Processor: RISC-V 32 bit single core, up to 160 MHz
ROM: 320 KB
SRAM: 512 KB HP, 16 KB LP
Flash: 8 MB SPI
Crystal: 40 MHz
Radio: Wi-Fi 6 (802.11ax) and 802.11 b/g/n 2.4 GHz, Bluetooth 5 (LE), IEEE 802.15.4 (Zigbee 3.0, Thread 1.3)
Module operating voltage: 3.0 V to 3.6 V, board via USB-C with 5 V
USB: USB-C via USB-UART bridge and USB-C directly on the ESP32-C6
RGB LED: GPIO8
Operating temperature: -40 °C to 85 °C
Dimensions: 85 × 56 × 33 mm
Weight: 33 g