WS2812B - 30LED/m LED NeoPixel Strip 0.33m

This NeoPixel RGB LED strip carries 10 RGB LEDs (5 × 5 mm) per sales unit with integrated WS2812B driver on a flexible board strip with self-adhesive back. Several strips can be chained. Each LED is controlled individually via a single output of a microcontroller such as Arduino UNO, Mega or Nano.

Recommended Accessories:

• 3pin Connection Cable 15cm for WS2812 LED Strip
• 3pin connector for WS2812 LED Strip
• 5V DC 5000mA Plug-in Power Supply AC/DC Adapter 5.5mm/2.1mm Plug
• Electrolytic capacitor 1000 µF 25 V

Features:

• With 3 pieces, 1 m of strip with a total of 30 LEDs is delivered in one piece
• Can be cut and soldered at the marked points, the strip may be soldered at certain points
• Observe the data direction: on the strip the arrow points from DO to Din
• Each LED individually controllable via one data line
• Several modules can be chained (data output to data input)
• Library: FastLED or Adafruit NeoPixel
• 300 to 500 Ω resistor in the data line recommended
• With 3.3 V boards, a level shifter on the data line is recommended
• 500 to 1000 µF capacitor between plus and minus at the end of the strip recommended

Application Examples:

• Lighting for model making and enclosures
• Light effects in your own projects

Documentation:

• NeoPixel Überguide (Adafruit)
• FastLED library (GitHub)
• Adafruit NeoPixel library (GitHub)
• WS2812B datasheet (PDF)

Technical Data:

• Driver chip: WS2812B
• LED: 5050 RGB
• Operating voltage: 5 V DC
• Current consumption: up to approx. 60 mA per LED at full white
• Number of LEDs per metre: 30
• Connections: Din, DO, +5V, GND
• Board colour: white
• Width: 10 mm
• Thickness: 2 mm
• Weight (0.33 m): 3.5 g

Scope of Delivery:

• 1× 10 LED 0.33 m WS2812B NeoPixel strip