Neopixel Ring Set with 1/8/12/16/24/32 WS2812 RGB LED

This round DFRobot board carries 93 WS2812B RGB LEDs on six rings with 1, 8, 12, 16, 24 and 32 LEDs. The rings can be broken out and used individually or as a chain: DO of one ring to DI of the next. Every LED can be addressed individually, all of them on one data line of a microcontroller such as Arduino, ESP32 or Raspberry Pi Pico.

The LEDs run on 5 V. With 3.3 V microcontrollers such as ESP8266 or ESP32, raise the data line to 5 V with a level shifter.

Recommended Accessories:

Features:

93 WS2812B LEDs on 6 rings: 1, 8, 12, 16, 24 and 32 LEDs
Rings can be broken out, usable individually or as a chain
Every LED individually addressable, 256 brightness levels per colour
One data line for all LEDs (DI, DO)
Beam angle 180° according to the wiki

Application Examples:

Lamps and ring lights with colour change, e.g. for photo and video
Displays, clocks and light effects
Light control over WiFi with WLED on an ESP32

Documentation:

Technical Data:

Manufacturer: DFRobot
Manufacturer SKU: FIT0676
LED type: WS2812B (5050)
Number of LEDs: 93 (1 + 8 + 12 + 16 + 24 + 32)
Ring diameters: 12, 32, 52, 72, 92 and 112 mm
Operating voltage: 5 V
Current consumption: up to 1 A according to DFRobot; calculated up to about 5.6 A when all LEDs light white at full brightness (60 mA per LED)
Brightness levels: 256 per colour
Refresh rate: at least 400 Hz
Connection: solder pads on each ring for 5 V, GND, data in and data out
Weight: 46 g