5m SK6812 RGBCW - 60LED/m LED NeoPixel Strip Roll

This NeoPixel RGBCW LED strip carries 300 LEDs (5 × 5 mm) on a 5 m roll with integrated SK6812 driver on a flexible board strip with self-adhesive back. Besides red, green and blue, each LED has a cold white LED that is controlled separately. Several strips can be chained. Each LED is controlled individually via a single output of a microcontroller such as Arduino UNO, Mega or Nano.

Recommended Accessories:

Features:

Roll with 5 m of strip in one piece, 60 LEDs per metre
Successor of the WS2812B. The biggest difference is the additional white LED, which is controlled separately
Can be cut and soldered at the marked points, the strip may be soldered at certain points
Observe the data direction: on the strip the arrow points from DO to Din
Each LED individually controllable via one data line
Several modules can be chained (data output to data input)
Library: Adafruit NeoPixel with RGBW setting, FastLED supports RGBW from version 3.7.7 according to the project page
300 to 500 Ω resistor in the data line recommended
With 3.3 V boards, a level shifter on the data line is recommended
500 to 1000 µF capacitor between plus and minus at the end of the strip recommended

Application Examples:

Lighting for model making and enclosures
Light effects with colours and pure white
Indirect lighting with adjustable colour

Documentation:

Technical Data:

Driver chip: SK6812
LED: 5050 RGBW
Colours: RGB CW (CW = cold white)
Operating voltage: 5 V DC
Power: 0.3 W per LED
At 5 m, calculated up to approx. 90 W, i.e. approx. 18 A at 5 V (300 × 0.3 W), choose the power supply accordingly
Number of LEDs per metre: 60
Wavelength colours: R = 650 nm, G = 520 nm, B = 460 nm
Brightness levels: 256
Beam angle: 120°
Connections: Din, DO, +5V, GND
Protection class: IP30, not waterproof
Board colour: white
Weight: 114 g