1.47\" 172×320 IPS LCD Display Module

The 1.47 inch display from DFRobot shows 172 × 320 pixels on an IPS panel with rounded corners and a bezel of only 1 mm. The ST7789V3 driver is controlled via SPI, with the DFRobot_GDL and LVGL libraries it shows text, images, animations and measured values. On FireBeetle boards with a GDI connector the included FPC cable is all it takes, on other boards it is wired via the pin header.

Recommended Accessories:

• FireBeetle 2 ESP32-E IoT Development Board 16M Flash 2M PSRAM
• FireBeetle 2 Board ESP32-E

Features:

• IPS panel, readable from all viewing angles, brightness typically 600 cd/m²
• 172 × 320 pixels, active area 19.1 × 33.8 mm, rounded corners, 1 mm bezel
• ST7789V3 driver, SPI interface
• GDI connector for the FPC cable and solder pads for the 8-pin header
• Backlight with 3 white LEDs, switchable via the BLK pin
• DFRobot_GDL and LVGL libraries

Application Examples:

• Mini weather station and display for temperature and humidity
• Clocks and pendants
• Small game consoles and video players
• Displays for measuring devices

Documentation:

• Wiki DFRobot DFR0995
• Schematic (PDF)
• Dimension drawing (image)
• Graphics library DFRobot_GDL for Arduino (GitHub)

Technical Data:

• Manufacturer: DFRobot
• Manufacturer SKU: DFR0995
• Diagonal: 1.47 inch
• Resolution: 172 × 320 pixels
• Driver: ST7789V3
• Interface: SPI, GDI
• Brightness: typically 600 cd/m²
• Viewing angle: all directions
• Operating voltage: 3.3 V (VCC pin 3.3 V to 5 V according to the wiki)
• Backlight: 3 white LEDs in parallel
• Active area: 19.1 × 33.8 mm
• Module: 19.5 × 44.5 mm
• Pins: VCC, GND, SCLK, MOSI, CS, RES, DC, BLK
• Operating temperature: -20 °C to 70 °C
• Weight: 13 g

Scope of Delivery:

• 1× 1.47" 172×320 IPS LCD display module
• 1× 8-pin header
• 1× FPC cable for GDI