ESPHome
With ESPHome you can build your own smart home devices without writing a single line of C++: you describe sensors and actuators in a short YAML file, ESPHome creates the firmware for the ESP32 and integrates the device locally into Home Assistant, with no cloud at all.
Here you will find everything ESPHome officially supports: ESP32 boards, sensors, relays, displays and LED strips. If you'd rather not solder, start with the Plug & Play Devices that come with ESPHome already installed.
Refine Search
LilyGo TTGO T-Camera ESP32 with 0.96 OLED Normal
The LilyGo T-Camera (version V1.6.2) is an ESP32 board with an OV2640 camera (2 megapixels), a 0.96-..
CHF23.90 Ex Tax: CHF22.11
LilyGo TTGO T-Display ESP32 16MB 1.9 Inch
The LILYGO T-Display Bar is a compact ESP32-S3 development board with a distinctive elongated form f..
CHF35.90 Ex Tax: CHF33.21
LilyGo TTGO T-Display ESP32-S3 Pro LR1121 LoRa 868MHz with 2.33 inch Display
The LILYGO T-Display S3 Pro LR1121 is a fully-equipped development board for demanding IoT and Mesht..
CHF69.90 Ex Tax: CHF64.66
LilyGo TTGO T-ETH-Lite ESP32-S3 Shield with OV2640 Camera
The LILYGO T-ETH-Lite ESP32-S3 with Camera Shield is a compact development board set for Ethernet-ba..
CHF14.90 Ex Tax: CHF13.78
LilyGo TTGO T-Mini ESP32- S3 EU868 with 1 inch E-Paper Display
The LILYGO T-Mini E-Paper S3 is an ultra-compact development board that combines an ESP32-S3 microco..
CHF45.90 Ex Tax: CHF42.46
LilyGo TTGO T-Motor ESP32 5-12V 2.8A TMC2209 Stepper Motor Driver Kit with OLED Display and Case
The LilyGo T-Motor is a stepper motor driver with an ESP32, a TMC2209 driver and an MT6816 magnetic ..
CHF36.90 Ex Tax: CHF34.14
LilyGo TTGO T-OI Plus ESP32-C3 CH9102F Development Board
The LilyGo T-OI Plus is a compact development board with the ESP32-C3 (RISC-V, 160 MHz), Wi-Fi and B..
CHF7.90 Ex Tax: CHF7.31
LilyGo TTGO T-Relay ESP32 Dev Board with 4x 5V DC Relays
The LilyGo T-Relay is a board with an ESP32-WROVER-B and four HRS4H-S-DC5V relays that can be switch..
CHF22.90 Ex Tax: CHF21.18
LilyGo TTGO T-U2T USB to TTL Programmer CH9102
The LilyGo T-U2T is a USB-to-serial adapter (USB to TTL) with the CH9102 chip as an automatic downlo..
CHF11.90 Ex Tax: CHF11.01
LilyGo TTGo T-Weigh ESP32 4x Weight Sensor LoRa Node
The LilyGo T-Weigh is a LoRa node for up to four load cells. The board carries four HX711 load cell ..
CHF23.90 Ex Tax: CHF22.11
LilyGo TTGO T3 ESP32-S3 V1.3 868MHz with 0.96 inch display
The LILYGO T3 S3 V1.3 is a versatile LoRa development board based on the ESP32-S3 microcontroller wi..
CHF21.90 Ex Tax: CHF20.26
LilyGo TTGO T7 Mini32 V1.5 ESP32 Dual Core Development Board
The LilyGo T7 Mini32 V1.5 is a compact development board with the ESP32-WROVER-B module (dual-core X..
CHF15.90 Ex Tax: CHF14.71
LilyGo TTGO T8 V1.8 ESP32-Wrover Development Board
The LilyGo T8 V1.8 is a development board with the ESP32-WROVER module (dual-core Xtensa LX6, 240 MH..
CHF11.90 Ex Tax: CHF11.01
LilyGo T‑Halow V1.0 WiFi HaLow Development Board 859‑894 MHz
This board combines the range of WiFi HaLow with the performance of the ESP32-S3 microcontroller. Th..
CHF29.90 Ex Tax: CHF27.66
LilyGo T‑POE Pro Ethernet with ESP32 and RS485 Development Board
The LilyGo T‑POE Pro is a powerful IoT development board that integrates the ESP32‑WROVER‑E with ext..
CHF36.90 Ex Tax: CHF34.14
Load Cell Amplifier - HX711 Weighing Sensor 24 Bit
This breakout board carries the 24-bit A/D converter HX711 with two analog input channels. It is sui..
CHF4.90 Ex Tax: CHF4.53
Louder-ESP32-S3 Stereo Audio Development Board TAS5805M with External Antenna
The Louder-ESP32-S3 from Sonocotta is a complete stereo audio development board combining an ESP32-S..
CHF29.90 Ex Tax: CHF27.66
M5Stack 3A Relay Unit
The M5Stack 3A Relay Unit uses a relay to switch loads up to 30 V via a Grove port of an M5Stack Cor..
CHF5.90 Ex Tax: CHF5.46
M5Stack 6-Axis IMU Unit MPU6886
The 6-Axis IMU Unit from M5Stack measures acceleration and rotation rate in three axes each with the..
CHF8.90 Ex Tax: CHF8.23
M5Stack 8Angle Potentiometer Unit with STM32F030
The UNIT 8Angle is a state-of-the-art input device with 8 adjustable potentiometers, an integrated S..
CHF17.90 Ex Tax: CHF16.56
M5Stack 9g Servo Kit 180° 2 Pieces
This is a Micro Servo Kit from M5Stack. The kit includes two 9g 180° servo motors. The servos are ea..
CHF14.90 Ex Tax: CHF13.78
M5Stack 9g Servo Kit 360° 2 Pieces
This is a 360° Micro Servo Kit from M5Stack. The kit includes two 9g 360° servo motors. The servos a..
CHF14.90 Ex Tax: CHF13.78
M5Stack Air Quality Kit V1.1 with SCD40 and SEN55
The Air Quality Kit V1.1 from M5Stack is an integrated air quality monitoring device with low power ..
CHF99.00 Ex Tax: CHF91.58
M5Stack ATOMIC CANBus Base CA-IS3050G
The ATOMIC CANBus Base from M5Stack is a compact CAN bus communication unit specifically designed fo..
CHF11.90 Ex Tax: CHF11.01
M5Stack Atomic Echo Base with Microphone and Speaker
The M5Stack Atomic Echo Base is a versatile voice base specifically designed for the M5 Atom series...
CHF9.90 Ex Tax: CHF9.16
M5Stack ATOMIC GPS Base (M8030-KT)
With the M5Stack ATOMIC GPS Base, you experience reliable and precise GPS tracking for your M5Stack ..
CHF32.90 Ex Tax: CHF30.43
M5Stack ATOMIC RS485 Base
The M5Stack ATOMIC RS485 Base is a highly functional TTL-RS485 converter, specifically designed for ..
CHF11.90 Ex Tax: CHF11.01
M5Stack AtomS3R AI Chatbot CAM + Echo Base
The M5Stack AtomS3R AI Chatbot Kit combines a powerful speech and camera unit (AtomS3R-CAM) with an ..
CHF27.90 Ex Tax: CHF25.81
M5Stack Audio Module STM32G030 + ES8388
The M5Stack Audio Module enhances your projects with high-quality audio features in a compact, stack..
CHF11.90 Ex Tax: CHF11.01
M5Stack BTC Standing Base for M5 Core with integrated SHT30
The M5Stack BTC Standing Base holds an M5Stack Core at an angle, for example as a desk station. It h..
CHF9.90 Ex Tax: CHF9.16