ESP32-S3 LoRa Development Board LR1121 868MHz

The ESP32-S3 LoRa Development Board LR1121 868MHz is a compact microcontroller board from Waveshare that combines the powerful ESP32-S3 with the third-generation LoRa transceiver LR1121. This HF kit variant covers the Sub-GHz frequency range of 850 to 930 MHz as well as the 2.4-GHz ISM band, making it suitable for use in Europe, North America, and Oceania. The ESP32-S3 features a Xtensa 32-bit LX7 Dual-Core processor with clock speeds of up to 240 MHz and supports 2.4-GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE). Onboard, it includes 4 MB of flash memory and 2 MB of PSRAM, complemented by 512 KB of SRAM and 384 KB of ROM in the chip. The board supports modulation schemes such as LoRa, (G)FSK, and LR-FHSS and is compatible with the frequency bands of the SX126x and SX127x series. An integrated AES-128 encryption unit ensures enhanced data security, while the TCXO crystal oscillator guarantees frequency stability even under extreme temperature conditions. The castellated design with gold-plated solder pads allows for direct integration onto custom carrier boards. The kit version includes a USB Type-C adapter board and an FFC cable, simplifying setup and programming. The board can be integrated into LoRaWAN networks via a LoRa gateway and connected to cloud platforms like TTN or ChirpStack. Development can be done using the Arduino IDE or the ESP-IDF framework, with example programs provided in C. MeshCore provides official firmware for this board from version 1.18.0 (companion, repeater and room server). It is not yet listed in the MeshCore web flasher and is downloaded from the GitHub releases page. Meshtastic does not support this board.

Important: In Switzerland, a maximum of 25 mW (14 dBm) usually applies in the 868 MHz band. The transmit power is set in the program.


Recommended Accessories:


Features:

  • Dual-Core processor with Xtensa LX7 architecture and up to 240 MHz clock speed for compute-intensive IoT applications.
  • Third-generation LoRa transceiver LR1121 supports Sub-GHz, S-Band, and 2.4-GHz ISM frequency bands.
  • Integrated AES-128 encryption secures wireless data transmission at the hardware level.
  • Castellated design with 2.54-mm pitch allows direct mounting on custom carrier boards.
  • Kit version with USB Type-C adapter board and FFC cable for easy setup and programming.
  • Typical communication range of up to 5 km in the Sub-GHz band and up to 2 km in the ISM band.

Application Examples:

  • Setting up a MeshCore node (companion, repeater or room server) for communication without internet connection
  • Remote monitoring of environmental sensors in agriculture via LoRaWAN
  • Industrial telemetry for wireless collection of machine data
  • Smart home control with energy-efficient long-range communication
  • Prototyping IoT sensor nodes with cloud connectivity via TTN or ChirpStack
  • Integration into Home Assistant with ESPHome

Documentation:


Technical Specifications:

  • Manufacturer: Waveshare
  • Manufacturer SKU: 34011
  • Main Controller: ESP32-S3 (Xtensa 32-bit LX7 Dual-Core, up to 240 MHz)
  • RF Chip: Semtech LR1121
  • Flash: 4 MB
  • PSRAM: 2 MB
  • SRAM: 512 KB
  • ROM: 384 KB
  • Wi-Fi: 2.4 GHz (802.11 b/g/n)
  • Bluetooth: 5 (LE)
  • Frequency Bands: 850 ~ 930 MHz (Sub-GHz), 2000 ~ 2500 MHz (S-band and 2.4-GHz ISM)
  • Modulation: LoRa, (G)FSK, LR-FHSS
  • Spreading Factor: SF5 ~ SF12
  • LoRa Data Rate: 0.091 ~ 62.5 Kbps
  • (G)FSK Data Rate: 0.6 ~ 300 Kbps
  • Transmit Power: -9 ~ 22 dBm (Sub-GHz), -18 ~ 13 dBm (ISM)
  • Receiver Sensitivity: -127 dBm (Sub-GHz, SF=7, CR4_5, BW=125 KHz), -111 dBm (ISM, SF=7, CR4_5, BW=800 KHz)
  • Transmit Current: 111.2 mA at 22 dBm, 49.6 mA at 13 dBm
  • Receive Current: 9.2 mA (125 KHz Sub-GHz), 8.1 mA (125 KHz ISM)
  • Typical Range: 5 km (Sub-GHz), 2 km (ISM)
  • Peripherals: 4× SPI, 2× I2C, 3× UART, 2× I2S, 2× ADC
  • GPIO: 21 Multifunction Pins
  • Antenna Connector: IPEX-1
  • Antenna Protection: TVS
  • Logic Level: 3.3 V
  • Operating Temperature: -40 ~ 85 °C
  • Programming Language: C/C++
  • Development Environments: Arduino IDE, ESP-IDF
  • Product Dimensions: 21.00 × 41.00 mm
  • Product Weight: 17 g
  • Packaging Dimensions: 150 × 100 × 15 mm
  • Gross Weight: 25 g

Contents:

  • 1× ESP32-S3 LoRa Development Board LR1121 868MHz
  • 1× IPEX-1 to SMA Adapter Cable
  • 1× 2 dB SMA Antenna
  • 2× 2.4-GHz Antenna
  • 1× 8-Pin FFC Cable (approx. 15 cm)
  • 1× Tiny Adapter A USB Type-C Adapter Board

Write a review

Note: HTML is not translated!
    Bad           Good

ESP32-S3 LoRa Development Board LR1121 868MHz

  • Brand: Waveshare
  • Product Code: 425615
  • Availability: Out Of Stock
  • CHF17.90

  • Ex Tax: CHF16.56

Related Products

RP2040 SX1262 LoRa HF 850-930MHz Kit with USB-C Adapter

RP2040 SX1262 LoRa HF 850-930MHz Kit with USB-C Adapter

The RP2040 SX1262 LoRa HF Kit offers you a powerful development board for IoT applications and wirel..

CHF18.90 Ex Tax: CHF17.48

RP2040 SX1262 LoRa HF 850-930MHz Module

RP2040 SX1262 LoRa HF 850-930MHz Module

The RP2040 SX1262 LoRa RF Kit offers you a powerful development board for IoT applications and wirel..

CHF14.90 Ex Tax: CHF13.78

LilyGo Lora T3 S3 LR1121 with 0.96 Inch OLED Display 830-940MHz

LilyGo Lora T3 S3 LR1121 with 0.96 Inch OLED Display 830-940MHz

The LilyGo Lora T3 S3 LR1121 is a versatile development board, ideal for wireless IoT applications. ..

CHF27.90 Ex Tax: CHF25.81

LilyGo T3-S3 MVSR LoRa Development Board 868 MHz

LilyGo T3-S3 MVSR LoRa Development Board 868 MHz

The T3-S3 MVSR combines the ESP32-S3 development board with an MVSR extension for audio, vibration, ..

CHF31.90 Ex Tax: CHF29.51

LilyGo T-Lora C6 868Mhz Development Board

LilyGo T-Lora C6 868Mhz Development Board

The LilyGo T-LoRa C6 is a versatile LoRa development board based on the modern ESP32-C6 microcontrol..

CHF18.90 Ex Tax: CHF17.48

LilyGo TTGO T-Display ESP32-S3 Pro LR1121 LoRa 868MHz with 2.33 inch Display

LilyGo TTGO T-Display ESP32-S3 Pro LR1121 LoRa 868MHz with 2.33 inch Display

The LILYGO T-Display S3 Pro LR1121 is a fully-equipped development board for demanding IoT and Mesht..

CHF69.90 Ex Tax: CHF64.66

LILYGO T3S3 LoRa Development Board SX1262 868MHz

LILYGO T3S3 LoRa Development Board SX1262 868MHz

The LILYGO T3 S3 is a compact development board that combines an ESP32-S3 microcontroller with a Sem..

CHF19.90 Ex Tax: CHF18.41

Heltec WiFi LoRa 32 V4 2MB SX1262 868MHz with OLED

Heltec WiFi LoRa 32 V4 2MB SX1262 868MHz with OLED

The Heltec WiFi LoRa 32 V4.3.1 is a powerful IoT development board combining an ESP32-S3R2 microcont..

CHF29.90 Ex Tax: CHF27.66

Tags: ESP32-S3, LR1121, Waveshare, Development Board, 868MHz, IoT, LoRaWAN, MeshCore, Sub-GHz, LPWAN, Microcontroller, Wireless Module, Bluetooth, Wi-Fi, ESPHome