ESP32-P4 Ethernet / PoE Development Board with PoE Module
The Waveshare ESP32-P4 Ethernet / PoE development board (ESP32-P4-ETH) is based on Espressif's ESP32-P4NRW32X with a RISC-V 32-bit dual-core processor and an additional low-power core. 32 MB PSRAM is integrated in the chip package, and the board carries 32 MB NOR flash. The ESP32-P4 has no built-in Wi-Fi or Bluetooth: networking runs over the 100 Mbit/s RJ45 Ethernet port. With the included PoE module, power and data come through a single network cable; alternatively, the board is powered via USB Type-C. MIPI-DSI and MIPI-CSI (2-lane each) are available for displays and cameras, along with USB 2.0 OTG High Speed, a TF card slot (SDIO 3.0), a microphone and a speaker connector. The 2×20-pin GPIO header provides 27 freely programmable GPIOs and fits some Raspberry Pi Pico HATs. The two 20-pin headers are included but not soldered. For images and video, a JPEG codec, Image Signal Processor, Pixel Processing Accelerator and H.264 encoder are integrated. Secure Boot, Flash Encryption, cryptographic accelerators and a true random number generator (TRNG) protect firmware and data.
Recommended Accessories:
- Cudy POE200 30W Gigabit PoE+ Injector IEEE 802.3at/af
- Cudy FS1006P 6-Port Fast Ethernet PoE+ Switch 60W
- 2m S/FTP Ethernet Patch Cable RJ45 Cat.6 Network Cable
- 10.1inch DSI Capacitive Touch Display, 800×1280
- 16GB MicroSDHC Memory Card Class 10 UHS-I incl. SD Adapter
Features:
- RISC-V dual-core processor with 32 MB PSRAM and 32 MB NOR flash for demanding multimedia applications.
- 100 Mbit/s Ethernet (RJ45) for a stable wired network connection.
- PoE module included: power and data over one network cable, alternatively powered via USB Type-C.
- MIPI-DSI for DSI touch displays from 5 to 10.1 inches and MIPI-CSI for cameras such as the OV5647.
- Microphone, speaker connector and H.264 encoder for voice and video projects.
- 2×20-pin GPIO header with 27 programmable GPIOs, pin headers supplied loose.
Application Examples:
- Integration into Home Assistant with ESPHome
- Sensor and control nodes with PoE power in building automation
- Control panel with DSI touch display and wired network
- Network camera with MIPI-CSI camera and H.264 encoder
- AI voice assistant with microphone and speaker
- IoT gateway with Ethernet connection and GPIO expansions
Documentation:
Technical Specifications:
- Manufacturer: Waveshare
- Manufacturer SKU: 34247
- Model: ESP32-P4-POE-ETH-NH
- Chip: ESP32-P4NRW32X, RISC-V 32-bit dual-core (HP) + single-core (LP)
- Memory: 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP SRAM, 8 KB TCM
- PSRAM: 32 MB (in chip package)
- Flash: 32 MB NOR flash
- Wireless: no Wi-Fi, no Bluetooth
- Ethernet: 100 Mbit/s, RJ45
- PoE: via PoE module (included)
- Power supply: USB Type-C or PoE
- USB: Type-C (power supply, programming), USB 2.0 OTG High Speed (4-pin header)
- Display interface: MIPI-DSI 2-lane (DSI displays 5, 7, 8 and 10.1 inch)
- Camera interface: MIPI-CSI 2-lane (e.g. OV5647)
- Image and video: JPEG codec, ISP, PPA, H.264 encoder
- Memory card: TF card slot (SDIO 3.0)
- Audio: onboard microphone, speaker connector MX1.25 2-pin (8 Ω, 2 W)
- GPIO: 2×20-pin header, 27 programmable GPIOs
- Other interfaces: I2C, I2S, SPI, UART, TWAI, ADC, LED PWM, MCPWM, RMT
- Buttons: BOOT, RESET
- Security: Secure Boot, Flash Encryption, cryptographic accelerators, TRNG
- Package dimensions: 110 × 80 × 25 mm
- Gross weight: 44 g
Contents:
- 1× ESP32-P4-ETH development board
- 1× PoE module
- 1× screw set
- 2× 20-pin header (not soldered)
ESP32-P4 Ethernet / PoE Development Board with PoE Module
- Brand: Waveshare
- Product Code: 425708
- Availability: Out Of Stock
-
CHF18,90
- Ex Tax: CHF17,48
Related Products
ESP32-S3 OV2640 Camera RJ45 ETH POE Development Board Kit
With the ESP32-S3 OV2640 Camera RJ45 ETH POE Development Board Kit, you have a versatile solution fo..
CHF27,90 Ex Tax: CHF25,81
ESP32-S3 RJ45 ETH POE Development Board Kit
The ESP32-S3 RJ45 ETH POE Development Board Kit is the perfect choice for anyone looking to develop ..
CHF24,90 Ex Tax: CHF23,03
FireBeetle 2 ESP32-P4 AI Development Kit
The DFRobot kit consists of the FireBeetle 2 ESP32-P4 and a matching IO expansion board. The ESP32-P..
CHF20,90 Ex Tax: CHF19,33
FireBeetle 2 ESP32-P4 AI Vision Board with WiFi 6
The DFRobot FireBeetle 2 carries the ESP32-P4 with two RISC-V cores at 360 MHz, 32 MB PSRAM and 16 M..
CHF17,90 Ex Tax: CHF16,56
LilyGo T‑POE Pro Ethernet with ESP32 and RS485 Development Board
The LilyGo T‑POE Pro is a powerful IoT development board that integrates the ESP32‑WROVER‑E with ext..
CHF36,90 Ex Tax: CHF34,14
M5Stack Unit PoE with ESP32-P4
The M5Stack Unit PoE-P4 is a powerful, compact PoE Ethernet controller based on the ESP32-P4 SoC wit..
CHF22,90 Ex Tax: CHF21,18
ESP32-P4 Ethernet / PoE Development Board Kit A with Camera and Speaker
The Waveshare ESP32-P4 Ethernet / PoE development board (ESP32-P4-ETH) is based on Espressif's ESP32..
CHF28,90 Ex Tax: CHF26,73
LilyGo T-Internet-POE V2 ESP32 Ethernet Development Board with PoE
The LilyGo T-Internet-POE V2 is an ESP32 board with wired Ethernet and Power over Ethernet. At its c..
CHF20,90 Ex Tax: CHF19,33
Tags: ESP32-P4, Waveshare, Ethernet, PoE, RJ45, RISC-V, MIPI-DSI, MIPI-CSI, development board, microcontroller, ESP-IDF, H.264, edge computing, building automation, ESPHome












