eResin-PLA Pro Beige 1Kg UV405nm eSun

eResin-PLA Pro Beige is a PLA Polyol synthesized UV-Resin by eSun. The resin is made from organic compounds like PLA, making it very odorless compared to conventional resin. The eResin-PLA Pro impresses with its high strength, resolution, and excellent price-performance ratio. The resin is compatible with mono and multi-colored displays and is suitable for both small, delicate, and larger models. With its top price-performance ratio and neutral smell, we recommend the eResin-PLA Pro as the perfect beginner resin, or as the inexpensive all-rounder for experienced resin printing. eSun is one of the largest manufacturers of high-quality resin used for 3D printing.

Recommended accessories:

• Nitrile protective gloves L 100 pack
• Creality Resin Filter 20 Pieces
• 1 Liter Isopropyl alcohol / Isopropanol 99.8%

Features of eResin-PLA Pro: 

• Best price-performance ratio among all resins for DLP and LCD printers. 
  
• Organic PLA Polyol synthesized UV Resin 
  
• Specially developed for LCD/LED SLA printers, to achieve the best print quality. 
  
• The resin is compatible with all LCD printers with 405nm wavelength. 
  
• Odorless 
  
• High strength  
  
• Smooth print surface 
  
• High resolution.  

Application, important information: 

• Shake before use. Not too tight, to avoid air bubbles. Avoid direct sunlight during application. 
  
• Keep the resin away from children. 
  
• Wear gloves before use to avoid direct contact with the skin. 
  
• Ventilate the room well. 
  
• In case of accidental contact with the skin: Wash immediately with plenty of water. 
  
• Finished printed models must be cleaned with high-concentration alcohol (>95%) for about 30 seconds. 
  
• Finally, we recommend curing the printed parts under UV light until the final strength is reached. For UV light source, you can use UV LEDs or alternatively sunlight (2-3h). 

Download: 

• Safety data sheet 
  
• Technical data sheet eResin-PLA Pro
  
• Print parameters eResin-PLA Pro

Technical details: 

• Manufacturer: eSun 
  
• Type: eResin-PLA Pro 
  
• Color: Beige 
  
• Manufacturer SKU: ERESINPLAPRO-BG
  
• Viscosity: 200-300mPa*s 
  
• Density: 1.1g/cm3 
  
• Tensile strength: 37-48MPa 
  
• Elongation at break: 25-28% 
  
• Bending strength: 36-49MPa 
  
• Notched impact strength: 32-36J/m 
  
• Hardness (Shore D): 78-80 
  
• Resin weight: 1000g

Scope of delivery:  

• 1x eResin-PLA Pro Beige 1Kg UV405nm eSun