Epoxy Kit 280g with Epoxy Resin L and Hardener L

This R&G epoxy kit contains 200 g of epoxy resin L and 80 g of hardener L for a total of 280 g of mixture. Resin and hardener have very good impregnation and wetting properties and are suitable for laminating carbon, glass, aramid and natural fibres. In 3D printing, the resin can be used for casting, sealing and bonding. Curing generates heat: do not mix large quantities at once and pour layers no thicker than 3 mm.

Recommended alternative in a larger pack: Epoxy Kit 1kg with Epoxy Resin L and Hardener L

Recommended Accessories:

• Digital Precision Scale 0.1g-3000g
• PP Mixing Cup 120ml
• Stirring sticks Beech 100 pcs.
• Nitrile Protective Gloves L 100-pack

Features:

• Low viscosity, free-flowing, free of solvents and fillers
• High transparency
• Good UV resistance
• Tack-free curing even in very thin layers
• High static and dynamic strength
• Free of nonylphenol and DETA
• Not cytotoxic (cell-damaging)
• Long processing time of approx. 40 minutes (100 g / 20 °C)
• Curing time at room temperature 23 °C over 24 hours
• Mixing ratio in parts by weight 100:40 (resin L : hardener L)

Application Examples:

• Laminating carbon, glass, aramid and natural fibres
• Sealing 3D printed vases and bowls: pour about 2 mm of epoxy into the bottom, let it cure for at least 24 hours and test for leaks with water
• Casting and bonding 3D printed parts

Documentation:

• Technical data sheet

Technical Data:

• Manufacturer: R&G Faserverbundwerkstoffe
• Mixing ratio (resin L : hardener L): 100:40 parts by weight
• Processing time: approx. 40 minutes (100 g / 20 °C)
• Curing time at 23 °C: over 24 hours
• Content epoxy resin L: 200 g
• Content hardener L: 80 g
• Total weight: 351 g

Scope of Delivery:

• 1× epoxy resin L 200 g
• 1× hardener L 80 g
• 1× instructions with mixing table