Epoxy Kit 280g with Epoxy Resin L and Hardener L

This epoxy kit includes 200g of epoxy resin and 80g of hardener, allowing you to create a total of 280g of mixture. Due to the chemical reaction that generates heat, large quantities should not be mixed at once. The Epoxy Resin L and Hardener S are characterized by their excellent soaking and wetting properties and are ideal for laminating carbon, glass, aramid and natural fibers. In 3D printing, the resin can also be used for pouring, sealing and bonding. However, it is only suitable for layers up to a maximum thickness of 3mm to avoid excessive heat generation. If you want to make 3D printed vases and bowls waterproof, you can fill the bottom of the vase with a 2mm thick layer of epoxy after printing and let it cure for at least 24 hours. After that, you can fill the vase with water to check it for leaks. If the 3D printing process is carried out correctly, no water should leak out.

Recommended Accessories:

• Nitrile Protective Gloves L 100pcs
• Stirring Rods Beech 100pcs
• PP Mixing Cup 120ml
• Digital Precision Scale 0.1g-3000g

Features of Epoxy Resin L / Hardener L:

• Low-viscosity
• High transparency
• Good UV resistance
• Non-tacky curing even with thin layers
• High static and dynamic strength
• Free of Nonylphenol and DETA
• Thin viscosity, solvent and filler free
• This Epoxy Kit is not cytotoxic (cell-damaging)
• Long working time of approx. 40 minutes (100g / 20°C)
• Curing time at room temperature 23°C over 24h
• Mixing ratio in weight parts 100:40 (Resin L:Hardener L)

Download:

• Safety Data Sheet Epoxy Resin L
• Safety Data Sheet Hardener L
• Technical Data Sheet

Hazard Statements:

• Causes skin irritation.
• May cause allergic skin reactions.
• Causes serious eye irritation.
• Toxic to aquatic life with long lasting effects.
• Harmful if swallowed or inhaled.
• Causes severe skin burns and eye damage.

Technical Details:

• Mixing ratio (Resin L:Hardener L): 100:40
• Processing time: 40 minutes
• Curing time 23°C: over 24h
• Weight Epoxy Resin L: 200g
• Weight Hardener L: 80g
• Total Weight: 351g

Delivery content:

• 1x Epoxy Resin L 200g
• 1x Hardener L 80g
• 1x Operating instructions with mixing table