LilyGo T-Display-S3 ESP32-S3 with 1.9 Inch Display
The LilyGo T-Display-S3 is a development board with the ESP32-S3R8 (dual-core Xtensa LX7), Wi-Fi and Bluetooth LE and a 1.9 inch IPS colour display with 170 × 320 pixels. The display with the ST7789 controller is connected via an 8-bit parallel interface. The board is programmed and powered via USB-C directly on the ESP32-S3. A 3.7 V LiPo battery can be connected to the JST 1.25 mm connector and is charged via USB; its voltage can be measured on GPIO4.
Recommended Accessories:
Features:
- ESP32-S3R8, dual-core Xtensa LX7
- 16 MB flash, 8 MB PSRAM (OPI)
- Wi-Fi 2.4 GHz and Bluetooth LE
- IPS display 1.9 inch, 170 × 320 pixels, ST7789 controller, 8-bit parallel
- USB-C directly on the ESP32-S3 for programming and power
- Two buttons: boot on GPIO0, freely usable on GPIO14
- JST 1.25 mm connector for a 3.7 V LiPo battery with charging circuit, factory charging current 500 mA
- Battery voltage on GPIO4, measurable only without USB power
- IPEX connector for an external antenna
- Programming with Arduino or MicroPython
Application Examples:
- Small displays for measured values and states
- Control units and status displays in the smart home
- Portable battery-powered devices
- Integration into Home Assistant with ESPHome
Documentation:
Technical Data:
- Manufacturer: LilyGo
- Manufacturer SKU: H564
- Microcontroller: ESP32-S3R8
- CPU: Xtensa dual-core LX7
- Flash: 16 MB
- PSRAM: 8 MB (OPI)
- Radio: Wi-Fi 2.4 GHz, Bluetooth LE
- Display: IPS, 1.9 inch, 170 × 320 pixels, ST7789, 8-bit parallel
- Buttons: GPIO0 (boot), GPIO14
- Battery connector: JST 1.25 mm, LiPo 3.7 V
- Connector: USB-C
- Programming languages: C/C++ (Arduino), MicroPython
- Dimensions: 62 × 26 × 10 mm
- Weight: 27 g
Scope of Delivery:
- 1× LilyGo T-Display-S3 ESP32-S3 with 1.9 Inch Display
- 2× pin header 12-pin
- 1× JST 1.25 mm 2-pin cable
LilyGo T-Display-S3 ESP32-S3 with 1.9 Inch Display
- Brand: Lilygo
- Product Code: 422500
- Availability: In Stock
-
CHF22,90
- Ex Tax: CHF21,18
Related Products
USB 3.0 Type C Cable 1m black
This black DFRobot cable connects a USB-A port to a device with a USB-C socket. It transfers data an..
CHF8,90 Ex Tax: CHF8,23
LilyGo T-PicoC3 ESP32-C3 RP2040 Dual MCU with 1.14 Inch Display
The LilyGo T-PicoC3 combines two microcontrollers on one board: a Raspberry Pi RP2040 and an ESP32-C..
CHF18,90 Ex Tax: CHF17,48
LilyGo T-Dongle ESP32-S2 Module with Display
The LilyGo T-Dongle-S2 is a USB stick with the ESP32-S2 and a 1.14 inch IPS colour display with 135 ..
CHF15,90 Ex Tax: CHF14,71
LilyGo T-Display ESP32 16MB CH9102F with 1.14 Inch Display
The LilyGo T-Display is a development board with an ESP32 (dual-core Xtensa LX6), Wi-Fi and Bluetoot..
CHF18,90 Ex Tax: CHF17,48
LilyGo T-QT Pro ESP32-S3 4M Flash with 0.85 Inch Display
The LilyGo T-QT Pro is a very small development board with the ESP32-S3FN4R2 (4 MB flash, 2 MB PSRAM..
CHF16,90 Ex Tax: CHF15,63
LilyGo T-SIM7080G-S3 with NB-IoT Cat-M and GPS
The LilyGo T-SIM7080G-S3 combines an ESP32-S3 (16 MB flash, 8 MB PSRAM, Wi-Fi and Bluetooth LE) with..
CHF43,90 Ex Tax: CHF40,61
LilyGo T-Dongle-S3 ESP32 with USB and Display
The LilyGo T-Dongle-S3 is a USB stick with the ESP32-S3 (Wi-Fi, Bluetooth LE), 16 MB flash and a 0.9..
CHF21,90 Ex Tax: CHF20,26
LilyGo T-Embed ESP32-S3 with Encoder and Display
The LilyGo T-Embed is a development board in a housing with the ESP32-S3 (16 MB flash, 8 MB PSRAM), ..
CHF39,90 Ex Tax: CHF36,91
LilyGo T-Display-S3 Touch ESP32-S3 with 1.9 Inch Touchscreen
The LilyGo T-Display-S3 Touch is a development board with the ESP32-S3R8 (dual-core Xtensa LX7), Wi-..
CHF31,90 Ex Tax: CHF29,51
LilyGo AMOLED T-Display-S3 ESP32-S3 with 1.9 Inch Display
This is a 1.91 inch 240x536 pixel AMOLED display module with an ESP32-S3 from Lilygo. The integrated..
CHF29,90 Ex Tax: CHF27,66
LilyGo T-Embed Black ESP32-S3 with Encoder and Display
The T-Embed from Lilygo is a development board that uses the ESP32S3 chip and offers a variety of fu..
CHF29,90 Ex Tax: CHF27,66
LilyGo T-Display S3 Pro with 2.33 Inch Touch Display
The LilyGo T-Display S3 Pro stands out with its 2.33-inch touch-display and is an advanced version o..
CHF32,90 Ex Tax: CHF30,43
LilyGo T-Display S3 Long with 3.4 Inch Touch Display
Discover the LilyGo T-Display S3 Long, a high-tech development board that stands out with its impres..
CHF25,90 Ex Tax: CHF23,96
LilyGo T-Display AMOLED Lite ESP32-S3 with 1.47 Inch Display
The LilyGo T-Display AMOLED Lite is the first development board using the ESP32-S3 to control an AMO..
CHF29,90 Ex Tax: CHF27,66
LilyGo T4-S3 ESP32-S3 with 2.41Inch Touchscreen Display
Discover the world of microcontrollers with the LilyGo T4-S3, a powerful development board that comb..
CHF69,90 Ex Tax: CHF64,66
LilyGo AMOLED Plus T-Display S3 ESP32-S3 with 1.9 Inch Display
The LilyGo AMOLED Plus T-Display S3 is a compact development module with a powerful ESP32-S3 microco..
CHF38,90 Ex Tax: CHF35,99
LilyGo TTGO T-Display ESP32 16MB 1.9 Inch
The LILYGO T-Display Bar is a compact ESP32-S3 development board with a distinctive elongated form f..
CHF35,90 Ex Tax: CHF33,21
Tags: Lilygo, ESP32-S3, T-Display-S3, IPS, TFT, LCD, Display, Screen, Module, ESP32, USB-C, 3.3V, 5V, SPI, Bluetooth, BLE, BLE5.0, WiFi, IPEX, Arduino, MicroPython, ST7789, ESP32-S3R8, 170x320, 1.9 inch, PSRAM, H564, ESPHome