4-Channel 5V / 3.3V Logic Level Converter

With this module, you can connect controllers with different logic voltages. For example, the Raspberry Pi runs on 3.3V and the Arduino Uno on 5V. If you want to connect these devices via SPI, you can use this converter module. The board has 4 channels. It can easily be used on breadboards and works with all protocols (SPI, Serial, I2C,...) and digital signals. This board does not support analog signals.

Info: The converter is suitable up to a baud rate of 28800bps. If you need higher, we recommend the TXS0108E which goes up to 110Mbps.

Connections:

3.3V      <=Converter =>     5V

GPIO          LV1|HV1           GPIO   

GPIO          LV2|HV2           GPIO

3.3V              LV|HV             5V

GND         GND|GND         GND

GPIO          LV3|HV3          GPIO

GPIO          LV4|HV4          GPIO

Technical Details:

• Size: 15.5 x 13 x 2.6mm
• Maximum baud rate: 28800bps
• Weight: 2g
  

What's Included:

1x Logic Level Converter 4-Channel

1x Pin Header 12-Pin