PLA-Luminous Orange Glow in the Dark Filament 1.75mm 1Kg eSun

PLA Glow Luminous Orange from eSun is based on a standard PLA filament. This filament makes your prints glow in blue. Like other glow-in-the-dark filaments, the PLA Luminous-Orange first needs to be charged with light. It works best with UV light. 

Info: Luminous filaments are very abrasive. We recommend using a hardened or coated nozzle 

Recommended Nozzles for Printing:

• Micro Swiss A2 Steel Coated Nozzle
• Micro Swiss M2 Hardened Steel Coated Nozzle

PLA+ Recommended Printing Parameters:

• Print Temperature: 190-210°C Recommended: 210°C
• Heatbed Temperature: 25-70°C Recommended: 60°C
• Fan Speed: 50 to 100% Recommendation: 80%
• Feed Rate: 40-100mm/s

Bambu Lab AMS-Compatible Cardboard Spool:

Our cardboard spools are perfectly tuned for use with the Bambu Lab AMS. The plastic coating of the cardboard running surface allows handling like conventional plastic spools – without any adapters. An environmentally friendly solution that does not compromise on comfort.

• Perfect Compatibility: Directly usable in the Bambu Lab AMS without additional tools.
• Easy Handling: Thanks to the plastic coating of the cardboard running surface, usable like plastic spools.
• Environmentally Friendly: Easy and ecological disposal through cardboard recycling channels.

Download:

• eSun Product Manual
• Filament Datasheet

Technical Details:

• Color: Luminous Orange
• Item Number: PLA-LM175CL-O1P1
• Filament Weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Printing Temperature: 205-225°C
• Density: 1.24g/cm3
• Melt Flow Index: 2g/10min
• Impact Strength: 7kJ/m²
• Elongation at Break: 29%
• Tensile Strength: 60MPa
• Heat Distortion Temperature: 52°C
• Spool Size Outer Diameter: 200mm
• Spool Width: 64mm
• Inner Diameter (Hole): 55mm
• Gross Weight: 1360g
• Dimensions: 198 x 198 x 60mm

Scope of Delivery:

• 1x PLA-Luminous Orange Glow in the Dark Filament 1.75mm 1Kg eSun