PLA-Luminous Green Glow in the Dark Filament 1.75mm 1Kg eSun

PLA Glow Luminous Green from eSun is based on a standard PLA filament. This filament makes your prints glow in blue. As with other glow-in-the-dark filaments, the PLA Luminous Green must first be charged with light. The best way is with UV light. 

Info: Luminous filaments are very abrasive. We recommend using a hardened or coated nozzle 

Recommended Nozzles for Printing:

• Micro Swiss A2 Steel Coated Nozzle
• Micro Swiss M2 Hardened Steel Coated Nozzle

PLA+ Recommended Print Parameters:

• Print temperature: 190-210°C Recommended: 210°C
• Bed temperature: 25-70°C Recommended: 60°C
• Fan speed: 50 to 100% Recommendation: 80%
• Feed rate: 40-100mm/s

Bambu Lab AMS-Compatible Cardboard Reel:

Our cardboard reels are perfectly tuned for use with Bambu Lab AMS. The plastic coating of the cardboard surface allows handling like conventional plastic reels - without an adapter. An environmentally friendly solution without sacrificing convenience.

• Perfect compatibility: Can be used directly in Bambu Lab AMS without additional tools.
• Easy handling: Usable like plastic reels due to the plastic coating of the cardboard surface.
• Environmentally friendly: Easy and ecological disposal through cardboard recycling routes.

Download:

• eSun Product Manual
• Filament Datasheet

Technical Details:

• Color: Luminous Green
• Article number: PLA-LM175CL-G1P1
• Filament weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Print temperature: 205-225°C
• Density: 1.24g/cm3
• Melt flow index: 2g/10min
• Impact strength: 7kJ/m²
• Elongation at break: 29%
• Tensile strength: 60MPa
• Heat deflection temperature: 52°C
• Spool size outer diameter: 200mm
• Spool width: 64mm
• Inner diameter (hole): 55mm
• Gross weight: 1360g
• Dimensions: 198 x 198 x 60mm

Contents of delivery:

• 1x PLA-Luminous Green Glow in the Dark Filament 1.75mm 1Kg eSun