PETG Gray Filament 1.75mm 1Kg eSun

The great advantage of PETG over ABS or PLA filament is its durability and robust structure. This means that PETG filament is significantly more impact resistant than ABS. The best-known advantage of PETG is that it largely prevents warping. This allows you to easily print parts that don't distort.

Conclusion: PETG Solid from Esun is very suitable for beginners and pros, is easy to print and also offers good adhesion properties and almost no warp effect during printing! PETG is the perfect alternative to ABS. PETG has very good toughness and impact strength to resist falls, shocks, and breaks from stretching. There are also no odors when printing with PETG, unlike with ABS.

Properties:

• Very resilient
• Water resistant and suitable for aquariums (100% infill)
• Top printing results and great value for money
• Low shrinkage rate and therefore low warping
• Optimal layer adhesion
• Good impact strength
• Heat resistant
• Very good weather resistance
• High UV resistance
• Resistant to many chemicals and oil
• PETG combines the advantages of PLA and ABS
• Building material class B1, flame retardant

PETG recommended printing parameters:

• Print temperature: 230-250°C Recommended: 240°C
• Heated bed temperature: 80°C
• Fan speed: 50 to 100% Recommendation: 60%
• Feed speed: 40-60mm/s (2400-3600mm/min)

Download:

• eSun Product Manual
• Safety Data Sheet PETG
• Data Sheet Filament

Technical Details:

• Color: Gray  
• Part number:  PETG175H1P1
• Weight of filament: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Print temperature: 230-250°C
• Density: 1.23g/cm3
• Melt flow index: 20g/10min
• Impact strength: 7kJ/m²
• Elongation at break: 228%
• Tensile strength: 49MPa
• Dimensional stability: 64°C
• Spool size diameter outside: 20cm
• Spool width: 6.7cm
• Inner diameter (hole): 5.3cm
• Weight of filament: 1000g
• Weight Empty Spool: 278g
• Total Weight: 1460g
• Dimension: 205 x 215 x75mm

Delivery Contents:

• 1x PETG Solid Filament 1.75mm Gray 1Kg eSun