Replacement filter V1 ver.2026 for 3D printer air filter system

The 3D Printer Filtration V1 Filters in the 2026 version are a three-stage replacement filter set for the 3D Printer Filtration System V1 2026. The set includes a pre-filter, a HEPA-H13 filter, and an activated carbon filter cartridge that together filter fine dust, ultrafine particles, and volatile organic compounds from the print chamber. The HEPA-H13 filter achieves a separation rate of at least 99.95% at the most difficult particle size to filter, making it particularly effective against ultrafine particles under 100 nm.

Note: These filters are exclusively compatible with the 3D Printer Filtration System V1 ver.2026 and do not fit in the older V1 version.

Features:

• Three-stage filter set with pre-filter, HEPA H13, and activated carbon covers particles and VOCs equally
• HEPA-H13 class with at least 99.95% separation rate filters ultrafine particles under 100 nm
• Activated carbon pellets with high iodine value adsorb styrene, caprolactam, and other print-specific pollutants
• Tool-free replacement of all three filter cartridges allows for quick maintenance without downtime
• Alternative configuration with double activated carbon stage offers enhanced VOC protection for ABS and ASA printing
• Lifespan of approximately three months with eight hours of daily printing operation

Application examples:

• Regular filter replacement in the 3D Printer Filtration System V1 2026 during intensive printing operations
• Enhanced odor protection through double activated carbon configuration for ABS and ASA printing
• Spare parts for Fab Labs and training rooms with a high volume of print jobs
• Stockpiling of filter sets for uninterrupted operation in serial production
• Optimization of air quality in poorly ventilated printing environments

Technical data:

• Type: Replacement filter set (three-stage)
• Version: 2026
• Filter stage 1: Pre-filter (coarse dust, filament residues)
• Filter stage 2: HEPA H13 (≥99.95% at MPPS, ultrafine particles <100 nm)
• Filter stage 3: Activated carbon (pellet carbon with high iodine value, VOC adsorption)
• Target pollutants: Styrene (ABS/ASA), caprolactam (Nylon/PA), acetaldehyde/lactide (PLA/PETG)
• Recommended replacement cycle: Approx. three months with eight hours of printing operation per day
• Compatibility: Exclusively 3D Printer Filtration System V1 2026
• Package dimensions: 130 × 130 × 130 mm
• Gross weight: 260 g

Scope of delivery:

• 1× Pre-filter
• 1× HEPA-H13 filter
• 1× Activated carbon filter cartridge