Shelly 1L WiFi Switch

With the Shelly 1L WiFi switch actuator, you can switch and control all types of loads (RLC, resistive, inductive, and capacitive) via WiFi. The Shelly 1L can be operated without a neutral conductor and does not necessarily require a neutral wire to be pulled if there is no neutral wire at the switching point. If you want to operate the Shelly without a neutral conductor, it will need a minimum resistive load of 20W for it to function correctly. If you have a lower load, you need to purchase the Shell Bypass which is connected in parallel to the consumer. When operating the Shelly 1L with a neutral conductor, there are no restrictions on the minimum load and you do not need a bypass.

Caution:
Working on the 230V grid is dangerous and can lead to fatal accidents. Therefore, always disconnect from the power supply and switch off the fuses when connecting or with the device opened. We cannot accept any liability for improper use of the device. If you do not feel confident installing the device yourself, it would be best to have it installed by a professional electrician. 

Features of Shelly 1L:

• Shelly 1L can be operated without a neutral conductor (Minimum load 20W or with Bypass).
• With the Shelly Cloud app, you can switch your lighting on or off via your smartphone or tablet.
• Shelly has an integrated WEB interface through which you can switch the Shelly on and off, make settings, or perform an OTA update.
• Shelly recognizes your location and allows you to control your lamps based on sunrise and sunset throughout the year.
• Shelly has an integrated weekly timer to set the switching on and off, depending on the time and day.
• Shelly is Home Assistant compatible. Control your Shelly with your voice through Google Home or Amazon Echo.
• With dimensions of 39 x 36 x 17mm, the Shelly Dimmer is very small and can thus be mounted behind switches and junction boxes.
• The Shelly Dimmer's PCB has an additional temperature sensor to protect against overload and switches off at high temperatures.

Documentation and Downloads Shelly 1L: 

• Manufacturer website
• Knowledge Base (Diagram, Instruction Manual, Technical Data)
• Facebook Forum Shelly
• Google Play Store
• Apple® App Store

Technical details:  

• Manufacturer: Allterco
• Type: Shelly 1L
• Maximum current: 4.1A
• Maximum power: 1000W
• Operating voltage: 110-230V AC 50/60Hz
• Power consumption: <1W
• Operating temperature: 0°C to 40°C
• Overload and temperature protection: 105°C
• Minimum mounting diameter: 50mm
• Radio signal power: 1mW
• Range (Depending on the environment): 50m Outdoor / 30m Indoor
• WiFi Protocol: WiFi 802.11 b/g/n
• Diameter minimal mounting opening: >50mm
• Dimensions: 39 x 36 x 17mm
• Weight: 35g

Box contents:

• 1x Shelly 1L WiFi Switch