RP2350 Development Board with 1.54inch Touch LCD 240x240 and Battery
The RP2350-Touch-LCD-1.54 is a compact development board from Waveshare based on the Raspberry Pi RP2350A microcontroller. The board features a unique dual-core and dual-architecture design, allowing the use of either two ARM Cortex-M33 cores or two Hazard3 RISC-V cores. It integrates a 1.54-inch IPS LCD with a capacitive touchscreen, offering a resolution of 240 × 240 pixels and 65K colors. The onboard QMI8658 6-axis IMU sensor includes a 3-axis gyroscope and a 3-axis accelerometer. For audio applications, it features a microphone, an ES8311 audio codec chip, an NS4150B audio amplifier, and a speaker connector (MX1.25). The board includes 16 MB NOR Flash memory, 512 KB SRAM, and a TF card slot for extended storage options. Power and programming are provided via a USB Type-C port, supporting USB 1.1 with device and host functionality. A 3.7 V 1000 mAh lithium battery is included and connects to the MX1.25 header; according to Waveshare it fits inside the case. The integrated charge and discharge management charges at up to 300 mA. Programming is supported via C/C++, MicroPython, and Arduino IDE. Additionally, it offers four multifunctional GPIO pins, I2C, UART, two 12-bit ADC channels, two controllable PWM channels, and 12 programmable PIO state machines. An integrated temperature sensor enables real-time monitoring of the chip temperature.
Recommended Accessories:
Features:
- Dual-architecture design allows the choice between ARM Cortex-M33 and Hazard3 RISC-V processor cores.
- Capacitive 1.54-inch IPS touch display with 240 × 240 pixels and 65K colors provides clear visuals with a wide viewing angle.
- Integrated QMI8658 6-axis IMU sensor with gyroscope and accelerometer enables motion detection.
- Audio functionality with microphone, ES8311 codec, NS4150B amplifier, and speaker connector is directly available on the board.
- Included 1000 mAh lithium battery with integrated charging management enables mobile operation.
- Support for C/C++, MicroPython, and Arduino IDE offers flexible development options.
Application Examples:
- Development of portable devices with touchscreen interface and battery operation.
- Prototyping sensor applications with motion detection via the integrated IMU.
- Building compact audio devices with microphone and speaker output.
- Creating interactive control units with graphical user interfaces.
- Experimenting with the RISC-V architecture in a stable development environment.
Documentation:
Technical Specifications:
- Manufacturer: Waveshare
- Manufacturer SKU: 34333
- Part Number: RP2350-Touch-LCD-1.54
- Microcontroller: RP2350A (Dual-Core, Dual-Architecture)
- Processor Cores: Dual ARM Cortex-M33 or Dual Hazard3 RISC-V
- Clock Frequency: up to 150 MHz
- SRAM: 512 KB
- Flash Memory: 16 MB NOR Flash
- Display: 1.54 Inch IPS LCD
- Display Resolution: 240 × 240 Pixels
- Display Colors: 65K
- Display Interface: 4-Wire SPI
- Display Driver IC: ST7789
- Touch Type: Capacitive
- Touch IC: CST816
- Active Display Area: 27.72 × 27.72 mm
- IMU Sensor: QMI8658 (6-Axis, 3-Axis Gyroscope + 3-Axis Accelerometer)
- Audio Codec: ES8311
- Audio Amplifier: NS4150B
- USB Port: Type-C (USB 1.1, Device and Host)
- Battery Connector: MX1.25, 3.7 V 1000 mAh lithium battery included
- Maximum Charging Current: 300 mA
- GPIO: 4× Multifunctional
- Interfaces: 1× I2C, 1× UART, 2× 12-Bit ADC, 2× PWM
- PIO State Machines: 12
- Memory Expansion: TF Card Slot
- Integrated Sensors: Temperature Sensor, Microphone
- Programming Languages: C/C++, MicroPython, Arduino IDE
- Product Weight: 63 g
- Packaging Dimensions: 110 × 82 × 30 mm
- Gross Weight: 75 g
Contents:
- 1× RP2350 Development Board with 1.54inch Touch LCD 240x240 and Battery
- 1× PC Insulation Film
Safety and disposal instructions
Charge only with a suitable charger. Do not short-circuit, open, damage or heat the battery above 60 °C. Keep out of reach of children. Do not use if damaged or deformed.
Disposal: Batteries and accumulators do not belong in household waste. Free return to us or any sales point – see Return & Disposal.
RP2350 Development Board with 1.54inch Touch LCD 240x240 and Battery
- Brand: Waveshare
- Product Code: 425767
- Availability: Out Of Stock
-
CHF22.50
- Ex Tax: CHF20.81
Related Products
RP2040-LCD Raspberry Pi Pico based MCU with LCD Screen
This is a version of the Raspberry Pi Pico with a built-in 0.96inch LCD screen from Waveshare. The b..
CHF15.90 Ex Tax: CHF14.71
RP2040 1.28inch Touch LCD Display Round
The RP2040 Touch-LCD 1.28 from Waveshare is tiny and features an integrated capacitive 1.28-inch tou..
CHF25.90 Ex Tax: CHF23.96
Raspberry Pi Pico 2 microcontroller
The Raspberry Pi Pico 2 is the next generation of the popular microcontroller board, offering you mo..
CHF8.90 Ex Tax: CHF8.23
RP2040 1.69 Inch Touch LCD Display Square
This compact 1.69-inch touch LCD display, based on the powerful RP2040 microcontroller, is ideal for..
CHF22.90 Ex Tax: CHF21.18
RP2350-Plus Raspberry Pi Pico based MCU with 4MB Flash
The RP2350-Plus is a powerful, affordable, and versatile development board based on the Raspberry Pi..
CHF9.90 Ex Tax: CHF9.16
RP2350-Zero Mini Raspberry Pi Pico based MCU
The RP2350-Zero is a compact and powerful development board specifically designed for IoT and embedd..
CHF8.90 Ex Tax: CHF8.23
RP2350 AMOLED Touch Display 2.41 inch with Case
The RP2350 AMOLED Touch Display 2.41 inches combines a high-resolution AMOLED panel with a powerful ..
CHF54.90 Ex Tax: CHF50.79
RP2350 Raspberry Pi i with 1.64 inch AMOLED Touch Display
The Waveshare RP2350-Touch-AMOLED-1.64-M is a highly integrated microcontroller development board in..
CHF24.90 Ex Tax: CHF23.03
RP2350 Raspberry Pi with 1.8 inch AMOLED Touch Display
The Waveshare RP2350-Touch-AMOLED-1.8 is a powerful microcontroller development board with extensive..
CHF29.90 Ex Tax: CHF27.66
Tags: RP2350, Waveshare, touch LCD, 1.54 inch, 240x240, ST7789, CST816, QMI8658, ES8311, RISC-V, Cortex-M33, MicroPython, battery, development board, Pico 2














