PET Basic Blue Transparent Refill Filament 1.75mm 1Kg eSun

The PET Basic Refill Filament from eSun offers high strength and pronounced chemical resistance for a variety of printing applications. Consistent material flow ensures clean surfaces with minimal stringing. Excellent layer adhesion ensures stable prints even with complex geometries. The process is almost odorless and remains consistently reliable even at higher speeds. Support structures can be effortlessly and residue-free removed, making post-processing easier. Hydrophobic properties prevent moisture absorption and ensure consistent results. The filament is easy to mount on the eSpool+, which not only avoids waste but also simplifies your storage. Additionally, it is 1:1 compatible with Bambulab's refill systems, providing you with maximum flexibility.

Recommended Accessories:

• eSpool+ Removable Spool for Refill Filament eSun

Properties:

• Heat Resistant: HDT of 60–80 °C (0.45 MPa) for use in heat-stressed applications.
• High Strength: Tensile Strength (Z) of 50–65 MPa for resilient components.
• Clean Surfaces: Consistent flow minimizes stringing and layer lines.
• Hydrophobic: Low moisture absorption for consistent print quality.
• Very good weather resistance
• High UV resistance
• Resistant to many chemicals and oil
• Vacuum-sealed packaging with desiccant
• Perfect Compatibility: The refill is fully compatible with the Bambulab Refill System, allowing you to continue using existing hardware.

Recommended Print Parameters:

• Print Temperature: 250–280 °C, recommended 270 °C
• Heated Bed: 70–90 °C, recommended 90 °C
• Fan: 40-70%
• Print Speed: ≤ 250 mm/s

Download:

• PET Basic Datasheet

Technical Data:

• Manufacturer: eSun
• Manufacturer SKU: PET-Basic175T-U1R1
• Color: Transparent Blue 
• Weight (net): 1000 g
• Diameter: 1.75 mm
• Tolerance: ± 0.05 mm
• Density: 1.28 g/cm³
• Melt Flow Index: 10–30 g/10 min (190 °C/2.16 kg)
• Tensile Strength (Z): 35–45 MPa
• Elongation at Break (Z): 4–6 %
• Flexural Strength (XY): 90–100 MPa
• Flexural Modulus (XY): 2100–2 500 MPa
• Impact Strength (IZOD XY): 3–5kJ/m²
• Heat Deflection Temperature (HDT 0.45 MPa): 60–80 °C
• Outer Spool Diameter: 200 mm
• Spool Width: 64 mm
• Inner Hole Diameter: 55 mm
• Gross Weight: 1360 g

Scope of Delivery:

• 1× PET Basic Transparent Blue Refill Filament 1.75mm 1Kg eSun