ESP32-S3 with 0.85 Inch LCD Display 128x128, Case and Battery
The ESP32-S3-LCD-0.85 is a compact development board from Waveshare based on the powerful ESP32-S3-PICO-1-N8R8 module. It features a Xtensa 32-bit LX7 Dual-Core processor with a clock speed of up to 240 MHz. The board integrates 512 KB SRAM, 384 KB ROM, 8 MB flash memory, and 8 MB PSRAM, providing ample resources for demanding applications. A 0.85-inch IPS LCD display with a resolution of 128 × 128 pixels and 65K colors enables the display of graphics and status information. For wireless communication, it offers 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with an integrated onboard antenna. The board is equipped with an ES8311 audio codec chip, an NS4150 audio amplifier, and a dual-microphone array, supporting both audio recording and playback. Eight perimeter RGB LEDs can be programmed to create diverse dynamic lighting effects. A TF card slot expands storage for data recording or media playback. Power is supplied via USB-C. A 3.7 V 1000 mAh lithium battery is included, fits inside the case and is charged via the MX1.25 connector with integrated charge and discharge management. The board comes in a square plastic enclosure and supports the development environments ESP-IDF and Arduino IDE. Additional peripheral devices can be connected via I2C and UART pads. A speaker header is available; a speaker is not included.
Recommended Accessories:
- 2W 8Ohm Speaker in Case (B)
- 256MB microSD Card
- 16GB MicroSDHC Memory Card Class 10 UHS-I incl. SD Adapter
- 0.3m Type C USB 2.0 Cable Blue
Features:
- Dual-Core processor with up to 240 MHz clock speed offers high computing power for multimedia and IoT applications.
- Integrated 0.85-inch IPS LCD display with 128 × 128 pixels and 65K colors enables compact graphic representation.
- Wi-Fi and Bluetooth 5 (LE) with onboard antenna allow wireless communication without external antenna modules.
- Onboard audio codec ES8311 and dual-microphone array support voice recording and audio playback.
- Eight programmable RGB LEDs create perimeter dynamic lighting effects for visual feedback.
- TF card slot and the included 1000 mAh battery with charge management expand storage and enable mobile operation.
Application Examples:
- Voice-controlled interaction with online AI platforms like DeepSeek or similar services.
- Compact status display with RGB lighting effects for smart home devices.
- Prototyping portable multimedia devices with audio and display functions.
- Data logger with TF card storage and wireless transmission via Wi-Fi or Bluetooth.
- Development of custom wearable projects with battery operation and small form factor.
- Integration into Home Assistant with ESPHome
Documentation:
Technical Specifications:
- Manufacturer: Waveshare
- Manufacturer SKU: 33878
- Processor: ESP32-S3-PICO-1-N8R8, Xtensa 32-bit LX7 Dual-Core, up to 240 MHz
- SRAM: 512 KB
- ROM: 384 KB
- Flash Memory: 8 MB
- PSRAM: 8 MB
- Wi-Fi: 2.4 GHz, 802.11 b/g/n
- Bluetooth: BLE 5
- Antenna: Onboard
- Display: 0.85-inch IPS LCD, 128 × 128 Pixels, 65K Colors
- Display Interface: 4-Wire SPI
- Display Driver: GC9107
- Display Size: 15.21 × 15.21 mm
- Viewing Angle: 160°
- Audio Codec: ES8311
- Audio Amplifier: NS4150
- Audio Input: ES7210, Dual-Microphone Array
- RGB LEDs: 8× perimeter, programmable
- Memory Expansion: TF Card Slot
- Battery: 3.7 V lithium, 1000 mAh, included, MX1.25 connector with charge/discharge management
- USB Port: Type-C
- Interface Pads: I2C, UART
- Speaker Header: yes (speaker not included)
- Buttons: PLUS, PWR, BOOT
- Supported Development Environments: ESP-IDF, Arduino IDE
- Display Operating Voltage: 3.3 V / 5 V
- Case: square plastic case
- Package Dimensions: 110 × 80 × 30 mm
- Gross Weight: 60 g
Contents:
- 1× ESP32-S3 with 0.85 Inch LCD Display in case
- 1× PC insulating sheet
Safety and disposal instructions
Charge only with a suitable charger. Do not short-circuit, open, damage or heat the battery above 60 °C. Keep out of reach of children. Do not use if damaged or deformed.
Disposal: Batteries and accumulators do not belong in household waste. Free return to us or any sales point – see Return & Disposal.
ESP32-S3 with 0.85 Inch LCD Display 128x128, Case and Battery
- Brand: Waveshare
- Product Code: 425614
- Availability: Out Of Stock
-
CHF19,90
- Ex Tax: CHF18,41
Related Products
LilyGo T-Display-S3 ESP32-S3 with 1.9 Inch Display
The LilyGo T-Display-S3 is a development board with the ESP32-S3R8 (dual-core Xtensa LX7), Wi-Fi and..
CHF22,90 Ex Tax: CHF21,18
LilyGo T-QT Pro ESP32-S3 4M Flash with 0.85 Inch Display
The LilyGo T-QT Pro is a very small development board with the ESP32-S3FN4R2 (4 MB flash, 2 MB PSRAM..
CHF16,90 Ex Tax: CHF15,63
ESP32-S3 1.69inch LCD Display Development Board 240x280
The ESP32-S3 1.69inch LCD Display Development Board is a compact and powerful solution for your deve..
CHF19,90 Ex Tax: CHF18,41
ESP32-S3 1.3inch Display Development Board, 240×240
With the ESP32-S3 1.3inch LCD Display Development Board, you get a versatile and powerful tool for y..
CHF17,90 Ex Tax: CHF16,56
Waveshare ESP32-S3 Touch LCD 3.5B-C 3.5 Inch 480×320 with OV5640 Camera
The Waveshare ESP32-S3 Touch LCD 3.5B-C is a powerful development module that offers a 3.5-inch TFT ..
CHF39,90 Ex Tax: CHF36,91
ESP32-S3 LCD 3.16 inch 320×820 Display
The Waveshare ESP32-S3 LCD 3.16 is a compact development board with a 3.16-inch LCD and a resolution..
CHF18,90 Ex Tax: CHF17,48
ESP32-S3 Knob Touch LCD 1.8 inch with Battery
The ESP32-S3 Knob Touch LCD 1.8 inch is a versatile development module that combines an ESP32-S3 mic..
CHF49,90 Ex Tax: CHF46,16
1.28-Inch Double Eye Round LCD Display with ESP32-S3
This development board combines two integrated 1.28-inch IPS displays with a resolution of 240×240 p..
CHF19,90 Ex Tax: CHF18,41
ESP32-S3 with 1.43 Inch AMOLED Touch Display, Metal Enclosure and Battery
The ESP32-S3 with 1.43-inch AMOLED Touch Display and Metal Enclosure is a compact development board ..
CHF37,90 Ex Tax: CHF35,06
ESP32-S3 AI Smart Speaker Development Board with Microphone Array and Battery
The Waveshare ESP32-S3 AI Smart Speaker Development Board is based on the powerful ESP32-S3R8 module..
CHF24,90 Ex Tax: CHF23,03
Tags: ESP32-S3, Waveshare, LCD Display, 0.85 Inch, 128x128, GC9107, Case, Battery, Microphone, ES8311, RGB LED, TF Card, WiFi, Bluetooth, ESPHome















