DFM8001 Indoor Energy Harvesting Set (mechanical, thermal, solar, RFEH)
This DFRobot set is an introduction to energy harvesting from the environment, for example from room light. It consists of an evaluation board with the DFM8001 module, a 45 × 45 mm amorphous silicon solar cell and two supercapacitor modules with 0.22 F and 1.5 F. The DFM8001 starts from 400 mV and 15 µW, continuously tracks the best operating point of the source with MPPT and charges a capacitor or battery. Two LDO outputs provide stable voltages for sensor nodes. Besides solar cells, according to DFRobot it is also suitable for thermal, mechanical and radio frequency sources (RFEH); these are not included.
Note: For the first test, leave the jumpers in the default position and use the new 0.22 F capacitor. Only change jumpers once all settings are clear (DFRobot Wiki).
Features:
- Cold start from 400 mV and 15 µW, continued operation from 150 mV
- MPPT with adjustable ratio 70, 75, 85 or 90 %
- Charge and discharge management for supercapacitor or battery, adjustable overcharge and over-discharge protection
- Two LDO outputs, each with switch: 1.2 to 1.8 V and 1.8 to 4.1 V
- Low voltage warning, indicator for ready LDO output
- Connection for a single-use backup battery
Application Examples:
- Sensor nodes powered by room light
- Smart home and ambient IoT devices without battery changes
- Asset tracking and monitoring in buildings and industry
- Experiments with solar cells and energy storage in class
Documentation:
- DFRobot Wiki KIT0197
- Getting started and jumper settings (DFRobot Wiki)
- DFM8001 datasheet (PDF)
- DFRobot Wiki DFR1108 DFM8001 module with pinout
Technical Data:
- Manufacturer: DFRobot
- Manufacturer SKU: KIT0197
- Operating voltage: 3.3 to 5.5 V DC (DFRobot)
- Input voltage: 150 mV to 5 V
- Cold start: input from 400 mV and 15 µW
- Sustaining voltage after cold start: 150 mV
- MPPT ratio: 70, 75, 85, 90 % (adjustable)
- LDO output low: 1.2 to 1.8 V, 20 mA
- LDO output high: 1.8 to 4.1 V, 80 mA
- Overcharge protection: 2.7 to 4.5 V adjustable
- Over-discharge protection: 2.2 to 3.6 V adjustable
- Solar cell: amorphous silicon, 45 × 45 mm, max. 90 µW at 200 lux, maximum power point 70 %
- Evaluation board: 57 × 42 mm
- DFM8001 module: 15 × 15 × 3.5 mm
- Weight: 47 g
Scope of Delivery:
- 1× evaluation board with DFM8001
- 1× supercapacitor module 0.22 F
- 1× supercapacitor module 1.5 F
- 1× amorphous silicon solar cell 45 × 45 mm
DFM8001 Indoor Energy Harvesting Set (mechanical, thermal, solar, RFEH)
- Brand: DFRobot
- Product Code: 423846
- Availability: In Stock
-
CHF19,90
- Ex Tax: CHF18,41
Related Products
DFM8001 Indoor Energy Harvesting Module for IoT Devices
The DFM8001 from DFRobot is a 15 × 15 mm module for harvesting energy from the environment (energy h..
CHF5,90 Ex Tax: CHF5,46
Tags: Energy, energy production, power generation, charging, solar, module, farad, solar cell, solar panel, electronics, kits, Arduino, Raspberry, IoT, heat, thermal, mechanical, RFEH, supercapacitor, photovoltaics, DFRobot, KIT0197, DFM8001, MPPT, energy harvesting







