ABS+ Red Filament 1.75mm 1Kg eSun
ABS Plus from eSun is an improved ABS filament that prints much better and has very little warping. ABS+ is for advanced users, is easier to print than standard ABS, and also offers good adhesion properties and almost no warping effect during printing! ABS+ is the alternative to ABS. ABS+ has very good toughness and impact resistance to withstand falls, bumps, and breaks due to stretching. The printed surface of ABS+ cannot be smoothed with solvent afterwards. However, ABS+ can be better mechanically finished with, for example, sandpaper.
Properties:
- Very resistant
- Reliable bed adhesion
- Lower shrinkage rate therefore also low warping
- Optimal layer adhesion
- Good impact resistance
- Resistant to many oils
Recommended ABS+ printing parameters:
- Printing temperature: 220-260°C Recommended: 240°C
- Heated bed temperature: 100°C
- Fan speed: 0 to 20% recommendation: 15% or off
- Feed speed: 40-60mm/s (2400-3600mm/min)
Download:
Technical details:
- Color: Red
- Filament weight: 1Kg
- Diameter: 1.75mm
- Tolerance: +-0.05mm
- Printing temperature: 220-260°C
- Density: 1.06g/cm3
- Melt flow index: 15g/10min
- Impact strength: 42kJ/m²
- Elongation at break: 30%
- Tensile strength: 40MPa
- Shape stability: Approx. 90°C
- Spool size diameter outside: 20cm
- Spool width: 6.85cm
- Diameter inside (hole): 5.3cm
- Filament weight: 1000g
- Weight empty spool: 229g
- Total weight: 1423g
- Dimension: 205 x 215 x75mm
Package Contents:
- 1x ABS+ Red Filament 1.75mm 1Kg eSun
ABS+ Red Filament 1.75mm 1Kg eSun
- Brand: eSUN
- Product Code: 421685
- Availability: In Stock
- CHF18,90
-
CHF16,90
- Ex Tax: CHF15,63
Related Products
Tags: Red, ABS, ABS+, Plus, ABS+175R1, Grey, Esun, Filament, 1.75, 1Kg, Solid, Printer, 3D Printer, FDM, Plastic, Printer, Red.